Vertex Learn

Level 1 Chemistry and Biology materials practice paper 2026

Question One

Question One

a
Achieved

Copper is used for the electrical wiring in houses. Most overhead power lines in New Zealand use aluminium conductors.

Describe the particles in a metal such as copper and the forces that hold them together.

Hint

Metals are made of positive ions and something else that is free to move.

Answer

A metal is made of positive metal ions (cations) packed closely together in a regular lattice, surrounded by delocalised electrons (valence electrons that are not attached to any one ion and can move throughout the metal). The particles are held together by metallic bonding: the strong attraction between the positive ions and the negative delocalised electrons, acting in every direction.

Step by step
  1. The particles are positive metal ions in a closely packed lattice.
  2. The valence electrons are delocalised: free to move through the whole metal.
  3. Metallic bonding is the strong attraction between the positive ions and the delocalised electrons, in all directions.
Full working
  1. positive ions in a lattice
  2. delocalised electrons, free to move
  3. metallic bondingstrong, non-directional
b
Merit

Explain why metals such as copper conduct electricity, and why they can be bent and drawn into wires (malleable and ductile) without breaking.

Hint

For conduction you need charged particles that can move. For bending, think about what happens when the layers of ions slide.

Answer

Metals conduct electricity because the delocalised electrons are charged particles that are free to move through the lattice. When a voltage is applied, they flow through the metal, carrying the current. Metals are malleable and ductile because the metallic bonding is non-directional: the delocalised electrons attract all the ions around them equally. When a force is applied, layers of positive ions can slide over each other into new positions, and the delocalised electrons still hold the ions together in the new positions, so the metal changes shape without breaking.

Step by step
  1. Conduction needs charged particles that can move.
  2. The delocalised electrons are free to move, so they carry the current.
  3. Metallic bonding acts in every direction, not between particular pairs of particles.
  4. Layers of ions can slide over each other, and the delocalised electrons keep holding them together, so the metal bends instead of breaking.
Full working
  1. delocalised electrons free to movecarry current
  2. non-directional metallic bonding
  3. layers of ions slide, still held by electronsmalleable and ductile
c
Excellence

The table compares copper and aluminium.

Evaluate why aluminium is used for long overhead power lines, while copper is used for wiring inside houses, using the data and the particles and forces in metals.

PropertyCopperAluminium
Density (g cm⁻³)8.962.70
Electrical conductivity (copper = 100)10061
Melting point (°C)1085660
Hint

Overhead lines hang between pylons and are very long. House wiring has to fit in small spaces and connect to switches.

Answer

Both metals conduct electricity because their delocalised electrons can move, and both are ductile enough to be drawn into wire because layers of ions can slide while the metallic bonding holds them. Copper conducts better: aluminium conducts only about 61% as well, so an aluminium wire must be thicker to carry the same current. For long overhead lines, weight matters most. Aluminium's density (2.70 g cm⁻³) is less than a third of copper's (8.96 g cm⁻³), because its atoms are lighter. Even a thicker aluminium conductor weighs about half as much as a copper conductor that carries the same current, so the pylons can be further apart and lighter, and it is cheaper. Inside a house, the wires are short, so weight does not matter, but they must be thin enough to fit in walls and in switches and sockets. Copper's better conductivity lets thinner wires carry the current safely, and copper is also more ductile and makes good, reliable connections. So aluminium suits long lines where low density is the priority, and copper suits house wiring where high conductivity in a small wire is the priority.

Step by step
  1. Both conduct (delocalised electrons) and both are ductile (layers slide).
  2. Copper conducts better; aluminium is about 61% as good, so it needs a thicker wire for the same current.
  3. Aluminium's density is 2.70 g cm⁻³ against copper's 8.96 g cm⁻³, less than a third.
  4. Even when thicker, aluminium is about half the weight for the same current, so pylons can be lighter and further apart.
  5. In houses, weight does not matter but space does, so copper's high conductivity allows thin wires.
  6. Each metal is chosen for the property that matters most in that use.
Full working
  1. both conduct and are ductiledelocalised electrons, layers slide
  2. copper conducts betteraluminium about 61%, needs thicker wire
  3. aluminium density 2.70 vs 8.96 g cm⁻³about half the weight for the same current
  4. overhead lines: weight mattersaluminium
  5. house wiring: thin wires, good connectionscopper
Question Two

Question Two

a
Achieved

Diamond and graphite are both made only of carbon atoms. Diamond-tipped saw blades are used to cut tiles and concrete, and graphite is used in pencils and as electrodes.

Describe the structure of diamond and of graphite.

Hint

Count how many other carbon atoms each carbon is bonded to, and whether the structure is in layers.

Answer

Both are covalent network solids. In diamond, each carbon atom is joined by strong covalent bonds to four other carbon atoms, in a rigid three-dimensional network. In graphite, each carbon atom is joined by strong covalent bonds to three other carbon atoms, forming flat layers of hexagons. The fourth valence electron from each atom is delocalised, free to move along the layer. The layers are held to each other only by weak forces.

Step by step
  1. Both are covalent networks of carbon atoms.
  2. Diamond: each C bonded to 4 others, a 3D network.
  3. Graphite: each C bonded to 3 others, in flat layers.
  4. In graphite the fourth electron is delocalised, and the layers are held together by weak forces.
Full working
  1. diamondeach C bonded to 4, 3D covalent network
  2. graphiteeach C bonded to 3, layers
  3. graphite: delocalised electrons; weak forces between layers
b
Merit

Explain why graphite conducts electricity and is soft and slippery, while diamond does not conduct and is extremely hard.

Hint

Which structure has electrons that can move? Which has weak forces that can be overcome easily?

Answer

Graphite conducts because each carbon atom uses only three electrons in covalent bonds; the fourth is delocalised and can move along the layers, carrying a current. Graphite is soft and slippery because the layers are held together only by weak forces, so they slide over each other easily (which is how a pencil leaves a mark). Diamond does not conduct because all four valence electrons of each carbon are used in covalent bonds, so there are no free electrons or ions to carry charge. Diamond is extremely hard because every atom is held in place by strong covalent bonds in all three dimensions, so a great deal of energy is needed to break the bonds and change its shape.

Step by step
  1. Graphite: one electron per C is delocalised and can move, so it conducts.
  2. Graphite: weak forces between layers, so they slide: soft and slippery.
  3. Diamond: all four electrons in bonds, none free, so it does not conduct.
  4. Diamond: strong covalent bonds in every direction, so it is extremely hard.
Full working
  1. graphite: delocalised electronsconducts
  2. graphite: weak forces between layerslayers slide, soft
  3. diamond: all electrons in bondsno conduction
  4. diamond: strong bonds in 3Dvery hard
c
Excellence

Evaluate why diamond is used for the cutting edge of saw blades for tiles and concrete, while graphite is used as electrodes (which carry current into a liquid) and in pencils. Refer to the structure and bonding of both.

Hint

Match each use to the property it needs, then explain that property from the structure.

Answer

A cutting edge for tiles and concrete must be harder than the material it cuts and must not wear away. Diamond is the hardest natural material, because each carbon atom is held by four strong covalent bonds in a rigid three-dimensional network, so cutting into it would mean breaking many strong bonds. Its very high melting point (from the same strong bonds) also means it is not damaged by the heat of friction. Graphite would be useless for cutting, because its layers slide over each other under force. An electrode must conduct electricity and must not melt or dissolve. Graphite conducts because of its delocalised electrons that move along the layers, and like diamond it has a very high melting point because of the strong covalent bonds within each layer, and it does not dissolve in water. Diamond cannot be used as an electrode because all its electrons are held in bonds. In a pencil, the weak forces between graphite's layers let layers slide off onto the paper, leaving a mark. So the same element gives two materials with very different properties, because the way the atoms are bonded is different, and each is chosen for the property its structure provides.

Step by step
  1. Cutting needs extreme hardness and heat resistance: diamond's strong 3D covalent bonds give both.
  2. Graphite's sliding layers would make it useless for cutting.
  3. Electrodes need conduction and a high melting point: graphite's delocalised electrons and strong bonds within layers give both.
  4. Diamond has no free electrons, so it cannot be an electrode.
  5. Pencils need layers that slide off: graphite's weak forces between layers.
  6. Same element, different bonding, so different properties and uses.
Full working
  1. cutting: hardness, high melting pointdiamond, strong 3D covalent network
  2. graphite layers slidenot for cutting
  3. electrodes: conduct, high melting pointgraphite, delocalised electrons
  4. diamond no free electronsnot an electrode
  5. pencils: layers slidegraphite
Question Three

Question Three

a
Achieved

On a Waikato dairy farm, the farmer uses urea fertiliser (CO(NH₂)₂, made at Kapuni), ammonium nitrate fertiliser (NH₄NO₃) and polythene irrigation pipes.

For each material, name the type of material and describe its particles and the forces between them.

Hint

Urea is made of small molecules, ammonium nitrate of ions, and polythene of very long chains.

Answer

Urea is a molecular material: it is made of small urea molecules, with strong covalent bonds inside each molecule and weak forces between the molecules. Ammonium nitrate is an ionic material: it is made of positive ammonium ions (NH₄⁺) and negative nitrate ions (NO₃⁻), held in a lattice by strong ionic bonds (attraction between opposite charges). Polythene is a polymer: it is made of very long chain molecules, with strong covalent bonds along each chain and weak forces between the chains.

Step by step
  1. Urea: molecular. Small molecules; covalent bonds inside, weak forces between molecules.
  2. Ammonium nitrate: ionic. NH₄⁺ and NO₃⁻ ions held by strong ionic bonds.
  3. Polythene: polymer. Long chains; covalent bonds along the chains, weak forces between chains.
Full working
  1. ureamolecular: molecules, weak forces between them
  2. ammonium nitrateionic: NH₄⁺ and NO₃⁻ ions, ionic bonds
  3. polythenepolymer: long chains, weak forces between chains
b
Merit

Urea melts at 133 °C and ammonium nitrate at 170 °C. Both dissolve well in water, which lets them reach plant roots.

Explain why urea has a low melting point for a solid, and why urea dissolves in water.

Hint

When urea melts, which forces are overcome? Are urea molecules attracted to water molecules?

Answer

Urea is a molecular solid. When it melts, only the weak forces between the urea molecules are overcome; the strong covalent bonds inside each molecule do not break. Little energy is needed to overcome weak forces, so urea melts at a low temperature for a solid (133 °C). Urea dissolves in water because urea molecules are polar (they have O and N atoms with H atoms attached) and are strongly attracted to water molecules, which are also polar. These attractions are strong enough to separate the urea molecules from each other, so they spread out among the water molecules and dissolve. This means rain can carry the dissolved fertiliser down to the roots.

Step by step
  1. Urea is molecular: melting only overcomes the weak forces between molecules.
  2. The covalent bonds inside the molecules stay intact.
  3. Weak forces need little energy, so the melting point is low.
  4. Urea molecules are polar and strongly attracted to polar water molecules.
  5. These attractions pull the urea molecules apart, so urea dissolves.
Full working
  1. meltingweak forces between molecules overcome, not covalent bonds
  2. little energylow melting point, 133 °C
  3. urea polar, attracted to waterdissolves
c
Excellence

The farmer is choosing between polythene and copper pipes for the farm's irrigation system, which carries cold water across paddocks. Polythene softens at about 110 to 135 °C; copper melts at 1085 °C.

Evaluate which material is more suitable, using the properties needed and the particles and forces in each material.

Hint

List what an irrigation pipe needs (flexibility, weight, not reacting with water or soil, temperature) and check each material.

Answer

An irrigation pipe must not dissolve or corrode in water and soil, should be light and flexible so it can be laid across uneven paddocks and survive being driven over, and only has to carry cold water. Polythene is a polymer of very long chain molecules. The chains are tangled and held to each other only by weak forces, so they can move past each other a little: the pipe is flexible and bends rather than cracking. The strong covalent bonds along the chains make it strong enough, and it does not react with or dissolve in water, so it does not corrode. Its particles (carbon and hydrogen atoms) are light and not closely packed, so it has a low density and is easy to carry and lay. Its weakness is that the weak forces between chains are overcome at a fairly low temperature, so it softens at about 110 to 135 °C, but cold irrigation water is far below this. Copper is a metal: its metallic bonding is strong, so it has a high melting point and can carry hot water, and it is malleable. But it is very dense (heavy), much more expensive, less flexible across rough ground, and it can slowly corrode. For cold irrigation water across paddocks, polythene is the more suitable choice; copper's high melting point is an advantage the job does not need.

Step by step
  1. Needs: no corrosion, light, flexible, only cold water.
  2. Polythene: long chains with weak forces between them, so it is flexible.
  3. Strong covalent bonds along the chains give strength; it does not react with water.
  4. Light atoms, loosely packed: low density, easy to lay.
  5. Low softening point (weak forces between chains) does not matter for cold water.
  6. Copper: strong metallic bonding gives a high melting point, but it is dense, costly and can corrode; its advantage is not needed here.
Full working
  1. pipe needs: no corrosion, light, flexible, cold water only
  2. polythene: long chains, weak forces betweenflexible
  3. covalent bonds along chainsstrong; unreactive with water
  4. low softening pointnot a problem for cold water
  5. copper: high melting point not needed; dense, costly, can corrodepolythene better

All NCEA Level 1 Science

A Vertex Academy practice paper, written from NZQA's 2026 assessment specification for AS 92023. It is not an NZQA paper. Grades use the 2025 exam's cut scores: 7, 13 and 19 out of 24 for Achieved, Merit and Excellence.