Level 2 Biology life processes in cells practice paper 2026
Question One
Kiwifruit contains an enzyme called actinidin, which digests proteins.
Describe how an enzyme such as actinidin speeds up a reaction. Use the terms active site, substrate and activation energy.
Hint
Think about where the substrate binds, and what the enzyme does to the energy needed for the reaction.
Answer
An enzyme is a protein that acts as a biological catalyst. Its active site has a specific shape that fits its substrate (for actinidin, proteins). The substrate binds to the active site, forming an enzyme-substrate complex. The enzyme lowers the activation energy of the reaction, so the protein is broken down into smaller pieces (peptides and amino acids) faster. The products leave the active site and the enzyme is unchanged, so it can be used again.
Step by step
- Enzymes are proteins that catalyse reactions in living things.
- Each enzyme has an active site with a shape that matches its substrate.
- The substrate binds to the active site to form an enzyme-substrate complex.
- The enzyme lowers the activation energy, so the reaction happens faster at body or room temperature.
- The products are released and the enzyme can catalyse the reaction again.
Full working
- active site has a specific shapefits the substrate
- enzyme-substrate complex forms
- activation energy loweredfaster reaction
- enzyme unchanged, reused
Jelly sets because gelatin, a protein, forms a network that traps water. A jelly made with fresh kiwifruit does not set, but a jelly made with cooked or tinned kiwifruit sets normally.
Explain these results.
Hint
What does actinidin do to gelatin? What does heating do to an enzyme?
Answer
Gelatin is a protein, so it is a substrate for actinidin. In fresh kiwifruit the enzyme is active: gelatin binds to its active site and is broken down into short pieces that cannot form the network, so the jelly stays runny. Cooking or tinning heats the kiwifruit to a high temperature. The heat breaks the weak bonds that hold the enzyme's three-dimensional shape, so the enzyme is denatured: its active site changes shape and gelatin no longer fits. The gelatin is not digested, its network forms, and the jelly sets.
Step by step
- Gelatin is a protein, and actinidin is a protein-digesting enzyme.
- Active actinidin in fresh kiwifruit breaks the gelatin into short pieces, so no network forms and the jelly does not set.
- Cooking heats the enzyme well above its optimum temperature.
- High temperature breaks the bonds that hold the enzyme's shape, so the active site changes shape: the enzyme is denatured.
- A denatured enzyme cannot bind gelatin, so the gelatin stays whole and the jelly sets.
Full working
- fresh kiwifruit: active actinidin digests gelatinno network, no set
- cooking: high temperature breaks bonds in the enzyme
- active site changes shapedenatured
- gelatin not digestedjelly sets
A class measured how much gelatin actinidin digested in 30 minutes at different temperatures. Their results are in the table.
Discuss the effect of temperature on the activity of actinidin, using the data.
| Temperature (°C) | 10 | 20 | 30 | 40 | 50 | 60 | 70 |
|---|---|---|---|---|---|---|---|
| Gelatin digested in 30 min (%) | 12 | 25 | 41 | 55 | 60 | 38 | 5 |
Hint
Split the graph into two parts: below the optimum, and above it. Use different ideas for each part.
Answer
From 10 °C to 50 °C the amount digested rises, from 12% to 60%. As temperature increases, the enzyme and substrate molecules have more kinetic energy and move faster, so they collide more often and more enzyme-substrate complexes form each minute; more of the collisions also have enough energy to react. The rate is highest at about 50 °C, the optimum temperature in these results. Above the optimum the amount digested falls sharply, to 38% at 60 °C and 5% at 70 °C. At these temperatures the increased vibration breaks the weak bonds holding the enzyme's shape, so the active site changes shape and the enzyme is denatured. Fewer enzyme molecules can bind substrate, so less gelatin is digested. Denaturation is permanent, so the enzyme would not recover if cooled, which is why cooked kiwifruit can be used in jelly.
Step by step
- Below the optimum (10 to 50 °C), the digestion increases from 12% to 60%.
- Higher temperature gives molecules more kinetic energy, so enzyme and substrate collide more often and more complexes form.
- The peak at about 50 °C is the optimum temperature in these results.
- Above the optimum, digestion falls quickly (38% at 60 °C, 5% at 70 °C).
- High temperatures break the bonds holding the enzyme's shape, so the active site changes and the substrate no longer fits: denaturation.
- Denaturation is permanent, so activity is lost even if the enzyme cools again.
Full working
- 10 to 50 °C: 12% to 60%more kinetic energy, more collisions, more complexes
- optimum about 50 °C
- 60 to 70 °C: 38% to 5%bonds break, active site changes, denatured
- denaturation permanentcooked kiwifruit enzyme stays inactive
Question Two
Ryegrass in a Waikato dairy paddock photosynthesises in its chloroplasts.
Describe where the light-dependent and light-independent stages of photosynthesis take place, and what happens in each stage.
Hint
One stage happens on membranes, the other in the fluid around them. Which stage needs light, and which uses carbon dioxide?
Answer
The light-dependent stage takes place on the thylakoid membranes (grana) of the chloroplast. Chlorophyll absorbs light energy, water is split into oxygen, hydrogen ions and electrons, oxygen is released, and ATP and NADPH are made. The light-independent stage (the Calvin cycle) takes place in the stroma. Carbon dioxide is fixed and, using the ATP and NADPH from the light-dependent stage, is converted into glucose.
Step by step
- Light-dependent stage: on the thylakoid membranes, where the chlorophyll is.
- Light energy splits water (photolysis), releasing oxygen as a waste product.
- The energy is used to make ATP and NADPH.
- Light-independent stage (Calvin cycle): in the stroma.
- CO₂ is fixed and reduced to glucose using ATP and NADPH.
Full working
- light-dependent: thylakoid membraneswater split, O₂ released, ATP and NADPH made
- light-independent: stromaCO₂ fixed, glucose made using ATP and NADPH
On a cold, cloudy winter morning, the ryegrass photosynthesises slowly.
Explain how light intensity and carbon dioxide concentration each affect the rate of photosynthesis, referring to the stage each one affects.
Hint
Light is needed by one stage; carbon dioxide by the other. Link them through ATP and NADPH.
Answer
Light intensity affects the light-dependent stage: with more light, chlorophyll absorbs more energy, so more water is split and more ATP and NADPH are made each second. Carbon dioxide affects the light-independent stage: with more CO₂, more is fixed in the Calvin cycle each second, so more glucose is made, as long as enough ATP and NADPH are supplied. The two stages depend on each other, so whichever factor is in shortest supply is the limiting factor. On a cloudy morning, low light limits the supply of ATP and NADPH, so even with plenty of CO₂ the Calvin cycle slows, and the whole rate of photosynthesis is low.
Step by step
- Light provides the energy for the light-dependent stage, so more light gives more ATP and NADPH.
- CO₂ is the raw material of the Calvin cycle, so more CO₂ means more is fixed into glucose.
- The Calvin cycle needs ATP and NADPH from the light-dependent stage, so the stages are linked.
- The factor in shortest supply limits the rate: the limiting factor.
- In dim light, ATP and NADPH run short, so the Calvin cycle is held back and the rate stays low.
Full working
- light intensitylight-dependent stage, more ATP and NADPH
- CO₂ concentrationlight-independent stage, more CO₂ fixed
- stages linked through ATP and NADPH
- factor in shortest supply limits the rate
A runner sprints 400 m at the Christchurch athletics track. In the first seconds her leg muscles use mostly aerobic respiration, but by the last 100 m much of their ATP comes from anaerobic respiration.
Discuss aerobic and anaerobic respiration in her muscle cells, and why her muscles rely more on anaerobic respiration towards the end of the race.
Hint
Compare where each happens, what it needs, what it makes and how much ATP it gives.
Answer
Aerobic respiration uses oxygen: glucose + oxygen → carbon dioxide + water, releasing a large amount of ATP (about 36 to 38 per glucose). Glycolysis happens in the cytoplasm, and the Krebs cycle and electron transport chain happen in the mitochondria, where the oxygen is needed. Anaerobic respiration happens without oxygen, in the cytoplasm only: glucose is broken down by glycolysis to lactic acid (lactate), giving only 2 ATP per glucose. During a 400 m sprint the muscles use ATP faster than the heart and lungs can deliver oxygen to the mitochondria, so aerobic respiration cannot keep up. Anaerobic respiration does not need oxygen and can make ATP quickly, so the muscles rely on it more and more. Its drawbacks are the small ATP yield, so glucose is used up fast, and the build-up of lactic acid, which lowers the pH in the muscle and contributes to fatigue. After the race she keeps breathing hard to supply oxygen to break down the lactate.
Step by step
- Aerobic: glucose + oxygen → carbon dioxide + water + about 36 to 38 ATP.
- Aerobic respiration starts with glycolysis in the cytoplasm, then continues in the mitochondria, which need oxygen.
- Anaerobic: glucose → lactic acid + 2 ATP, in the cytoplasm only, with no oxygen.
- In a sprint, ATP demand rises faster than the oxygen supply, so the mitochondria cannot make enough ATP.
- Anaerobic respiration makes ATP quickly without oxygen, so the muscles depend on it more as the race goes on.
- But it gives far less ATP per glucose and builds up lactic acid, which causes fatigue, and the lactate must be broken down later using oxygen.
Full working
- aerobic: needs O₂, cytoplasm and mitochondriaCO₂ + H₂O, about 36 to 38 ATP
- anaerobic: no O₂, cytoplasmlactic acid, 2 ATP
- sprint: O₂ supply cannot meet ATP demand
- anaerobic makes ATP fast without O₂relied on more
- low ATP yield, lactic acid builds upfatigue
Question Three
Before a cell divides by mitosis, its DNA is copied by semi-conservative replication.
Describe how DNA is replicated. Include complementary base pairing and the antiparallel strands.
Hint
Start with the double helix unzipping. Then describe how each new strand is built.
Answer
The enzyme helicase unwinds the double helix and breaks the hydrogen bonds between the base pairs, separating the two strands. Each strand acts as a template. Free nucleotides pair with the exposed bases by complementary base pairing: A with T, and C with G. DNA polymerase joins the new nucleotides into a strand. The two strands of DNA are antiparallel (they run in opposite directions), and DNA polymerase can only add nucleotides in one direction (5′ to 3′), so one new strand is made continuously and the other in short pieces that are then joined. Each new DNA molecule has one original strand and one new strand: this is semi-conservative replication.
Step by step
- Helicase unwinds the DNA and breaks the hydrogen bonds between bases, separating the strands.
- Each original strand is a template.
- Free nucleotides pair with complementary bases: A with T, C with G.
- DNA polymerase links the nucleotides. It works in only one direction, and the strands are antiparallel, so one strand is built continuously and the other in fragments.
- Each new molecule has one old and one new strand: semi-conservative.
Full working
- helicase unwinds, H bonds brokenstrands separate
- each strand a template
- complementary pairing: A-T, C-G
- DNA polymerase adds nucleotidesantiparallel strands, one direction
- one old + one new strandsemi-conservative
Students placed potato chips of equal size in sucrose solutions for 2 hours and measured the change in mass. Their results are in the table.
Explain the results, and estimate the sucrose concentration that has the same water potential as the potato cells.
| Sucrose (mol L⁻¹) | 0.0 | 0.2 | 0.4 | 0.6 |
|---|---|---|---|---|
| Change in mass (%) | +12 | +4 | −3 | −9 |
Hint
Water moves by osmosis from a region of higher water potential (more dilute) to lower water potential (more concentrated).
Answer
In pure water and 0.2 mol L⁻¹ sucrose, the solution outside has a higher water potential than the potato cells, so water moved into the cells by osmosis across their partially permeable membranes, and the chips gained mass (12% and 4%). In 0.4 and 0.6 mol L⁻¹ sucrose, the solution has a lower water potential than the cells, so water moved out by osmosis and the chips lost mass (3% and 9%). Where there is no change in mass, the water potentials are equal. The change crosses zero between 0.2 and 0.4 mol L⁻¹, at about 0.3 mol L⁻¹ (about 0.31), so this solution has the same water potential as the potato cells.
Step by step
- Osmosis is the movement of water across a partially permeable membrane from higher to lower water potential.
- In dilute solutions (0 and 0.2 mol L⁻¹) water enters the cells, so the mass increases.
- In concentrated solutions (0.4 and 0.6 mol L⁻¹) water leaves the cells, so the mass decreases.
- No change in mass means no net movement of water: equal water potentials.
- The mass change goes from +4% at 0.2 to −3% at 0.4, so it crosses zero at about 0.3 mol L⁻¹.
Full working
- 0 and 0.2 mol L⁻¹: higher water potential outsidewater in, mass gained
- 0.4 and 0.6 mol L⁻¹: lower water potential outsidewater out, mass lost
- zero change between +4% and −3%about 0.3 mol L⁻¹
Root hair cells take up water and mineral ions such as nitrate from the soil. When a paddock is waterlogged for several days after heavy rain, the grass takes up far less nitrate.
Discuss how water and nitrate ions enter root hair cells, and why waterlogging reduces nitrate uptake.
Hint
Nitrate is at a higher concentration inside the root cells than in the soil. Which transport process needs energy, and where does that energy come from?
Answer
Water enters root hair cells by osmosis: the cell sap has a lower water potential than the soil water, so water moves in across the partially permeable membrane, without the cell using energy. Nitrate ions are usually more concentrated inside the root cells than in the soil water, so they must be moved against their concentration gradient by active transport. Carrier proteins in the membrane pump the ions in, and this uses energy from ATP. The ATP comes from aerobic respiration in the mitochondria, which needs oxygen. Normally the roots get oxygen from air spaces in the soil. When the soil is waterlogged, the air spaces fill with water and oxygen diffuses only slowly through water, so the root cells run short of oxygen. Aerobic respiration slows, little ATP is made (anaerobic respiration gives only a little), and active transport of nitrate slows down, so the grass takes up far less nitrate. Water uptake by osmosis does not need ATP, so it is not affected in the same way.
Step by step
- Water: osmosis from the soil (higher water potential) into the root cells (lower water potential). No ATP needed.
- Nitrate: more concentrated inside the cells, so it must be moved against its gradient by active transport.
- Active transport uses carrier proteins and energy from ATP.
- ATP comes mainly from aerobic respiration, which needs oxygen from air spaces in the soil.
- Waterlogging fills the air spaces with water, so little oxygen reaches the roots.
- Less aerobic respiration means less ATP, so active transport of nitrate slows. Osmosis needs no ATP, so water still enters.
Full working
- water: osmosis, higher to lower water potentialno ATP
- nitrate: active transport against the gradientcarrier proteins, ATP
- ATP from aerobic respirationneeds O₂
- waterlogged: air spaces full of waterlittle O₂
- less ATPless active transport of nitrate
A Vertex Academy practice paper, written from NZQA's 2026 assessment specification for AS 91156. It is not an NZQA paper. Grades use the 2025 exam's cut scores: 7, 13 and 19 out of 24 for Achieved, Merit and Excellence.