Vertex Learn

Level 2 Chemistry bonding and energy practice paper 2026

Question One

Question One

a
Achieved

The fertiliser plant at Kapuni in Taranaki makes ammonia, NH₃, from natural gas. The gas also contains methane, CH₄, and carbon dioxide, CO₂.

For each of CH₄, NH₃ and CO₂, name the shape of the molecule and give the bond angle around the central atom.

Hint

Count the regions of electron density around the central atom (a double bond counts as one region), then decide whether any are lone pairs.

Answer

CH₄: tetrahedral, 109.5°. NH₃: trigonal pyramidal, about 107° (less than 109.5°). CO₂: linear, 180°.

Step by step
  1. CH₄: carbon has four bonding regions and no lone pairs. Four regions repel as far apart as possible, so the shape is tetrahedral, 109.5°.
  2. NH₃: nitrogen has three bonding regions and one lone pair. The four regions point to the corners of a tetrahedron, but only three hold atoms, so the shape is trigonal pyramidal, about 107°.
  3. CO₂: carbon has two double bonds and no lone pairs. Two regions repel to opposite sides, so the shape is linear, 180°.
Full working
  1. CH₄: 4 bonding regions, 0 lone pairstetrahedral, 109.5°
  2. NH₃: 3 bonding regions, 1 lone pairtrigonal pyramidal, about 107°
  3. CO₂: 2 regions (double bonds), 0 lone pairslinear, 180°
b
Achieved

Describe the Lewis structures of NH₃ and CO₂: the bonds between the atoms and the lone pairs on each atom.

Hint

Add up the valence electrons first: N has 5, H has 1, C has 4 and O has 6.

Answer

NH₃ (8 valence electrons): the N atom is joined to each of the three H atoms by a single bond, and N has one lone pair. CO₂ (16 valence electrons): the C atom is joined to each O atom by a double bond; each O atom has two lone pairs and C has none.

Step by step
  1. NH₃ has 5 + 3 × 1 = 8 valence electrons, which is four pairs.
  2. Three pairs make the three N–H single bonds. The fourth pair is a lone pair on nitrogen.
  3. CO₂ has 4 + 2 × 6 = 16 valence electrons, which is eight pairs.
  4. Two double bonds (four pairs) join C to each O, giving carbon a full octet. The other four pairs are lone pairs, two on each oxygen.
Full working
  1. NH₃: 5 + 3 = 8 electrons3 N–H single bonds, 1 lone pair on N
  2. CO₂: 4 + 12 = 16 electrons2 C=O double bonds
  3. 2 lone pairs on each O, none on C
c
Merit

Electronegativities: H 2.2, C 2.6, N 3.0, O 3.4.

Explain why NH₃ molecules are polar but CO₂ molecules are non-polar.

Hint

Decide first whether each bond is polar, then use the shape to decide whether the bond dipoles cancel.

Answer

Both molecules have polar bonds, because N is more electronegative than H, and O is more electronegative than C. NH₃ is trigonal pyramidal: the lone pair sits on one side, so the shape is not symmetrical and the N–H bond dipoles do not cancel. NH₃ is polar. CO₂ is linear and symmetrical: the two C=O bond dipoles are equal and point in opposite directions, so they cancel. CO₂ is non-polar.

Step by step
  1. N–H bonds are polar: N (3.0) attracts the shared electrons more than H (2.2), so N is δ− and H is δ+.
  2. C=O bonds are polar: O (3.4) is more electronegative than C (2.6).
  3. NH₃ is trigonal pyramidal. The three bond dipoles all point up towards N, and the lone pair is on one side, so they add up rather than cancel. NH₃ is polar.
  4. CO₂ is linear. Its two equal bond dipoles point in opposite directions and cancel, so CO₂ is non-polar.
Full working
  1. N–H and C=O bonds are both polardifference in electronegativity
  2. NH₃ trigonal pyramidal, not symmetricaldipoles do not cancel, polar
  3. CO₂ linear, symmetricaldipoles cancel, non-polar
d
Excellence

In the laboratory, ammonia, NH₃, and boron trifluoride, BF₃, both have a central atom bonded to three other atoms. Electronegativities: H 2.2, B 2.0, N 3.0, F 4.0.

Discuss the shapes and the polarities of NH₃ and BF₃.

Hint

Boron has only three valence electrons. How many regions of electron density does it have, and are any of them lone pairs?

Answer

NH₃: nitrogen has three bonding regions and one lone pair. The four regions repel to a tetrahedral arrangement, but only three hold atoms, so NH₃ is trigonal pyramidal (about 107°). BF₃: boron has three valence electrons and forms three single bonds with no lone pair, so it has three regions, which repel to a trigonal planar shape (120°). Both molecules have polar bonds (N–H difference 0.8, B–F difference 2.0). In NH₃ the shape is not symmetrical, so the bond dipoles do not cancel and the molecule is polar. In BF₃ the three equal B–F dipoles are spread evenly at 120° in a flat symmetrical shape, so they cancel and BF₃ is non-polar, even though its bonds are more polar than those in NH₃.

Step by step
  1. NH₃: N has 5 valence electrons. Three make bonds to H and two form a lone pair, so there are four regions of electron density.
  2. Four regions repel to a tetrahedral arrangement. With one lone pair, the shape of the atoms is trigonal pyramidal, about 107°.
  3. BF₃: B has 3 valence electrons, all used in three B–F bonds. Three regions and no lone pair give a trigonal planar shape, 120°.
  4. Both have polar bonds: N–H (3.0 − 2.2 = 0.8) and B–F (4.0 − 2.0 = 2.0).
  5. NH₃ is not symmetrical, so its bond dipoles do not cancel: NH₃ is polar.
  6. BF₃ is flat and symmetrical, so its three equal bond dipoles cancel: BF₃ is non-polar, even though B–F bonds are very polar.
Full working
  1. NH₃: 4 regions, 1 lone pairtrigonal pyramidal, about 107°
  2. BF₃: 3 regions, 0 lone pairstrigonal planar, 120°
  3. N–H and B–F bonds are polarelectronegativity differences 0.8 and 2.0
  4. NH₃ not symmetricaldipoles do not cancel, polar
  5. BF₃ symmetricaldipoles cancel, non-polar
Question Two

Question Two

a
Achieved

A class tested four solids. Their results are in the table.

For each solid, name the type of solid, the particles it is made of, and the attractive forces between those particles.

SolidMelting point (°C)Conducts as a solid?Conducts when molten?
copper1085yesyes
sodium chloride801noyes
silicon dioxide1710nono
iodine114nono
Hint

Look at which solids conduct, and when. Then think about which particles could carry a charge.

Answer

Copper: metallic solid; copper cations in a sea of delocalised electrons; metallic bonding (attraction between the cations and the delocalised electrons). Sodium chloride: ionic solid; Na⁺ and Cl⁻ ions; ionic bonds (attraction between oppositely charged ions). Silicon dioxide: covalent network solid; Si and O atoms; covalent bonds. Iodine: molecular solid; I₂ molecules; weak intermolecular forces between the molecules (covalent bonds within each molecule).

Step by step
  1. Copper conducts as a solid and as a liquid, which fits a metal: cations held together by delocalised electrons.
  2. Sodium chloride conducts only when molten, which fits an ionic solid: ions that can move only once the lattice breaks down.
  3. Silicon dioxide has a very high melting point and never conducts, which fits a covalent network: atoms joined by covalent bonds throughout.
  4. Iodine has a low melting point and never conducts, which fits a molecular solid: I₂ molecules held by weak intermolecular forces.
Full working
  1. coppermetallic: cations and delocalised electrons, metallic bonding
  2. sodium chlorideionic: Na⁺ and Cl⁻ ions, ionic bonds
  3. silicon dioxidecovalent network: Si and O atoms, covalent bonds
  4. iodinemolecular: I₂ molecules, weak intermolecular forces
b
Achieved

Copper is used for electrical wiring because it conducts electricity and is ductile: it can be drawn out into a thin wire.

Describe the features of the structure of copper that make it conduct and make it ductile.

Hint

Think about the electrons that are not attached to any one atom, and about what holds the layers of cations together.

Answer

Copper's valence electrons are delocalised: they are free to move through the whole lattice, so they can carry a current. The metallic bonding is non-directional: the delocalised electrons attract all the cations around them. When the metal is pulled, layers of cations can slide past each other and the delocalised electrons keep holding them together, so the copper stretches into a wire instead of breaking.

Step by step
  1. Copper is a lattice of cations surrounded by delocalised electrons.
  2. The delocalised electrons can move freely through the lattice, so when a voltage is applied they flow and carry the current.
  3. Metallic bonding acts equally in every direction, so it does not depend on which cation is next to which.
  4. When the wire is pulled, layers of cations slide past each other. The delocalised electrons still hold them together, so the metal changes shape without breaking.
Full working
  1. delocalised electrons free to moveconducts electricity
  2. metallic bonding is non-directional
  3. layers of cations slidestill held by delocalised electrons, so ductile
c
Merit

Explain why sodium chloride does not conduct electricity when it is solid, but does conduct when it is molten or dissolved in water.

Hint

For a current to flow, charged particles must be able to move. What are the charged particles in sodium chloride, and where are they in the solid?

Answer

Sodium chloride is made of Na⁺ and Cl⁻ ions. In the solid, each ion is held in a fixed position in the lattice by strong ionic bonds to the ions around it, so the ions cannot move and there are no free electrons: no current flows. When it is melted or dissolved, the lattice breaks down and the ions are free to move. The positive ions move towards the negative electrode and the negative ions towards the positive electrode, so the liquid conducts.

Step by step
  1. The charged particles in sodium chloride are ions, Na⁺ and Cl⁻. There are no delocalised electrons.
  2. In the solid, strong ionic bonds hold every ion in a fixed position in the lattice, so no charge can move.
  3. Melting or dissolving breaks down the lattice, so the ions become free to move.
  4. Moving ions carry charge, so the molten or dissolved salt conducts.
Full working
  1. charged particles: Na⁺ and Cl⁻ ions, no free electrons
  2. solid: ions fixed in the lattice by ionic bondscannot move, does not conduct
  3. molten or dissolved: ions free to moveconducts
d
Excellence

Iodine melts at 114 °C. It dissolves in cyclohexane, a non-polar solvent, but only very slightly in water. Silicon dioxide melts at 1710 °C and does not dissolve in either solvent.

Discuss these properties of iodine and silicon dioxide in terms of their particles and the forces between them.

Hint

For melting, ask which forces must be overcome. For dissolving, compare the attractions that must be broken with the new attractions that can form with the solvent.

Answer

Iodine is a molecular solid. Melting it overcomes only the weak intermolecular forces between I₂ molecules; the covalent bonds inside each molecule stay intact. Little energy is needed, so the melting point is low. I₂ molecules are non-polar. In cyclohexane, also non-polar, the attractions between I₂ and solvent molecules are similar in strength to those broken, so iodine dissolves. Water molecules are polar and strongly attracted to each other by hydrogen bonds; I₂ cannot form attractions with water as strong as these, so it barely dissolves. Silicon dioxide is a covalent network: each Si atom is covalently bonded to four O atoms, and each O to two Si atoms, in a giant three-dimensional network. Melting it means breaking many strong covalent bonds, which needs a great deal of energy, so its melting point is very high. Dissolving would also mean breaking covalent bonds, and the attractions to solvent molecules are far too weak to do this, so it dissolves in neither solvent.

Step by step
  1. Iodine is made of I₂ molecules. Melting separates the molecules: only weak intermolecular forces are overcome, not the covalent bonds inside each molecule.
  2. Weak forces need little energy, so iodine melts at only 114 °C.
  3. I₂ is non-polar, like cyclohexane. The new I₂ to solvent attractions are similar to the forces broken, so iodine dissolves in cyclohexane.
  4. Water molecules are polar and held together by strong hydrogen bonds. Non-polar I₂ cannot attract water molecules strongly enough to separate them, so iodine barely dissolves in water.
  5. Silicon dioxide is a covalent network. Every atom is joined to its neighbours by strong covalent bonds throughout the solid.
  6. Melting means breaking many strong covalent bonds, so the melting point is very high (1710 °C).
  7. No solvent can form attractions strong enough to break covalent bonds, so silicon dioxide dissolves in neither water nor cyclohexane.
Full working
  1. iodine: I₂ moleculesweak intermolecular forces overcome, low melting point
  2. I₂ non-polardissolves in non-polar cyclohexane
  3. water polar, hydrogen bondedI₂ barely dissolves
  4. SiO₂: covalent networkmany strong covalent bonds broken, very high melting point
  5. solvent attractions too weak to break covalent bondsSiO₂ insoluble in both
Question Three

Question Three

a
Achieved

Camping stoves burn butane, C₄H₁₀. An instant cold pack works by dissolving ammonium nitrate, NH₄NO₃, in water.

For each process, state whether it is exothermic or endothermic, give the sign of ΔrH, and describe what happens to the temperature of the surroundings.

Hint

A stove warms things up; a cold pack feels cold. Which way is energy moving in each?

Answer

Burning butane is exothermic: ΔrH is negative, energy is released to the surroundings, and their temperature rises. Dissolving ammonium nitrate is endothermic: ΔrH is positive, energy is absorbed from the surroundings (the water and your hand), and their temperature falls.

Step by step
  1. An exothermic process releases energy to the surroundings, so the surroundings warm up and ΔrH is negative.
  2. Burning butane heats a pot of water, so it is exothermic.
  3. An endothermic process absorbs energy from the surroundings, so the surroundings cool down and ΔrH is positive.
  4. The cold pack gets cold as the ammonium nitrate dissolves, so dissolving it is endothermic.
Full working
  1. butane burningexothermic, ΔrH negative, surroundings warm up
  2. ammonium nitrate dissolvingendothermic, ΔrH positive, surroundings cool down
b
Achieved

ΔcH(C₄H₁₀) = −2877 kJ mol⁻¹. M(C₄H₁₀) = 58.0 g mol⁻¹.

Calculate the energy released when 25.0 g of butane burns completely.

Hint

Find the number of moles first, n = m ÷ M.

Answer

n = 25.0 ÷ 58.0 = 0.431 mol. Energy released = 0.431 × 2877 = 1240 kJ (1.24 × 10³ kJ).

Step by step
  1. n(C₄H₁₀) = m ÷ M = 25.0 ÷ 58.0 = 0.4310 mol.
  2. Each mole releases 2877 kJ.
  3. Energy released = 0.4310 × 2877 = 1240 kJ, to three significant figures.
Full working
  1. n = 25.0 ÷ 58.0 = 0.431 mol
  2. energy = 0.431 × 2877
  3. energy released = 1240 kJ
c
Merit

Kapuni makes ammonia from nitrogen and hydrogen:

N₂(g) + 3H₂(g) → 2NH₃(g)

Bond enthalpies (kJ mol⁻¹): N≡N 945, H–H 436, N–H 391.

Calculate ΔrH for this reaction, and explain what the sign of your answer shows.

Hint

ΔrH = energy to break the bonds in the reactants − energy released making the bonds in the products. Count the N–H bonds in two NH₃ molecules.

Answer

Bonds broken: 945 + 3 × 436 = 2253 kJ. Bonds formed: 6 × 391 = 2346 kJ. ΔrH = 2253 − 2346 = −93 kJ mol⁻¹. The sign is negative, so the reaction is exothermic: more energy is released forming the six N–H bonds than is absorbed breaking the N≡N and H–H bonds.

Step by step
  1. Breaking bonds absorbs energy: one N≡N (945) and three H–H (3 × 436 = 1308), total 2253 kJ.
  2. Making bonds releases energy: two NH₃ have six N–H bonds, 6 × 391 = 2346 kJ.
  3. ΔrH = 2253 − 2346 = −93 kJ mol⁻¹.
  4. Negative means more energy is released than absorbed, so the reaction is exothermic.
Full working
  1. broken: 945 + 3 × 436 = 2253 kJ
  2. formed: 6 × 391 = 2346 kJ
  3. ΔrH = 2253 − 2346 = −93 kJ mol⁻¹negative, exothermic
d
Excellence

Methane burns in oxygen:

CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(g)

Bond enthalpies (kJ mol⁻¹): C–H 414, O=O 498, C=O 804, O–H 463. M(CH₄) = 16.0 g mol⁻¹.

Calculate ΔrH, then the energy released when 8.00 g of methane burns. A data book gives ΔcH(CH₄) = −890 kJ mol⁻¹, with liquid water as a product. Discuss why your value differs from the data book value.

Hint

Count every bond: four C–H in methane, one O=O in each O₂, two C=O in CO₂ and two O–H in each H₂O. Then think about what happens when water vapour condenses.

Answer

Bonds broken: 4 × 414 + 2 × 498 = 2652 kJ. Bonds formed: 2 × 804 + 4 × 463 = 3460 kJ. ΔrH = 2652 − 3460 = −808 kJ mol⁻¹. n(CH₄) = 8.00 ÷ 16.0 = 0.500 mol, so the energy released is 0.500 × 808 = 404 kJ. The data book value is more negative for two reasons. Bond enthalpies are averages taken over many different molecules, so they are not exact for the bonds in these particular molecules. And the data book value forms liquid water, while the calculation forms water vapour: when water vapour condenses to liquid, the molecules form attractions to each other and more energy is released, which makes ΔcH more negative.

Step by step
  1. Bonds broken: four C–H (4 × 414 = 1656) and two O=O (2 × 498 = 996), total 2652 kJ.
  2. Bonds formed: two C=O (2 × 804 = 1608) and four O–H (4 × 463 = 1852), total 3460 kJ.
  3. ΔrH = 2652 − 3460 = −808 kJ mol⁻¹.
  4. n(CH₄) = 8.00 ÷ 16.0 = 0.500 mol, so energy released = 0.500 × 808 = 404 kJ.
  5. Bond enthalpies are average values from many compounds, so a calculation with them is only approximate.
  6. The calculation makes water vapour. Condensing it to liquid water releases more energy, so the data book value (−890 kJ mol⁻¹) is more negative.
Full working
  1. broken: 4 × 414 + 2 × 498 = 2652 kJ
  2. formed: 2 × 804 + 4 × 463 = 3460 kJ
  3. ΔrH = 2652 − 3460 = −808 kJ mol⁻¹
  4. n = 8.00 ÷ 16.0 = 0.500 molenergy = 0.500 × 808 = 404 kJ
  5. average bond enthalpies; liquid water releases extra energy on condensingdata book more negative

All NCEA Level 2 Science

A Vertex Academy practice paper, written from NZQA's 2026 assessment specification for AS 91164. It is not an NZQA paper. Grades use the 2025 exam's cut scores: 8, 14 and 19 out of 24 for Achieved, Merit and Excellence.