Vertex Learn

Level 2 Earth and Space Science extreme Earth events practice paper 2026

Question One

Question One

a
Achieved

On 14 November 2016, just after midnight, a magnitude 7.8 earthquake struck North Canterbury. The rupture began about 15 km below the surface near Culverden, then travelled north for about 170 km, across more than 20 faults.

Describe the focus and the epicentre of this earthquake, and describe how its energy reached Kaikōura.

Hint

One of the two words is a point underground and the other is a point on the surface. For the energy, think about what spreads out from the place where the rock breaks.

Answer

The focus is the point underground where the rock first broke and the energy was released: about 15 km below the surface near Culverden. The epicentre is the point on the Earth's surface directly above the focus, also near Culverden. Strain energy stored in the rocks was released at the focus as seismic waves, which spread out in all directions through the rock and reached Kaikōura and the rest of the country.

Step by step
  1. The focus is where the earthquake starts: the point underground where the rock first breaks. For Kaikōura it was about 15 km down, near Culverden.
  2. The epicentre is the point on the surface directly above the focus. It is the place usually marked on a map.
  3. Before the earthquake, the plates' movement had bent and strained the rock, storing energy in it, like a stretched spring.
  4. When the rock broke, that stored strain energy was released as seismic waves.
  5. Seismic waves spread out from the focus in every direction, through the rock, and so they reached Kaikōura and places much further away.
Full working
  1. focus: the point underground where the rock first breaksabout 15 km down near Culverden
  2. epicentre: the point on the surface directly above the focus
  3. stored strain energy is released as seismic wavesat the focus
  4. seismic waves spread out in all directions through the rockso they reach Kaikōura
b
Merit

The Kaikōura earthquake had one magnitude, 7.8, but the shaking people felt was violent near the faults that ruptured and much weaker in Auckland.

Explain the difference between the magnitude and the intensity of an earthquake, and explain why the intensity changed from place to place.

Hint

Magnitude is about the earthquake itself. Intensity is about what people feel at one place. What happens to seismic waves as they travel further?

Answer

Magnitude measures the energy released at the source, so one earthquake has one magnitude. Intensity describes how strongly the ground shook at a particular place and what damage it did, so it is different in every town. Intensity was greatest near the ruptured faults because the seismic waves had travelled only a short distance and still carried most of their energy. As the waves travel further they spread out over a larger area and lose energy to the rock as heat, so by the time they reached Auckland the shaking was much weaker. Soft, wet ground such as river sediment can also shake more strongly than solid rock at the same distance.

Step by step
  1. Magnitude is a single number for the whole earthquake. It measures the energy released at the source. Kaikōura was 7.8.
  2. Intensity is local. It describes how strongly the ground shook at one place, and the effects on people and buildings there. It changes from town to town.
  3. Near the ruptured faults, the seismic waves had only a short way to travel, so they still carried most of their energy. The shaking was violent.
  4. As the waves travel, they spread out over a bigger and bigger area, so the energy reaching each square metre falls.
  5. The rock also turns some of the wave energy into heat as the waves pass through it.
  6. So by the time the waves reached Auckland, far from the source, the shaking was weak, even though the magnitude was still 7.8.
  7. Ground type matters too: soft, wet sediment can shake more strongly than solid rock at the same distance.
Full working
  1. magnitude: energy released at the sourceone number, 7.8
  2. intensity: strength of shaking at one placechanges from place to place
  3. near the faults the waves still carry most of their energyviolent shaking
  4. further away the waves spread out and lose energy as heatweaker shaking in Auckland
  5. soft sediment can increase the shaking
c
Excellence

The Kaikōura earthquake triggered more than 10,000 landslides across North Canterbury and Marlborough. Many of them fell into valleys and blocked rivers, forming landslide dams.

Discuss why this earthquake caused so many landslides, and discuss the hazards the landslide dams created for people downstream in the months after.

Hint

Think about the slopes and the rock before the earthquake, then what shaking does to a slope. For the dams, think about what builds up behind one, and what it is made of.

Answer

The hills of North Canterbury and Marlborough are steep, because uplift at the plate boundary keeps raising them, and much of the rock is fractured and weathered. On a steep slope, gravity already pulls material downhill, held back only by friction. Strong shaking adds extra, rapidly changing forces and loosens the material, so the downhill pull overcame friction on thousands of slopes at once. Rock and soil slid into valleys and blocked rivers. Behind each landslide dam, river water built up into a lake. The dam is a loose pile of debris, not a built structure, so as the lake rises, water can seep through it or flow over the top and erode it. If the dam fails, the stored water is released at once as a flood carrying mud and rock, far larger than the river's normal flow, which threatens people, roads and farms downstream. Heavy rain or aftershocks can make failure more likely, so the dams had to be watched for months.

Step by step
  1. Start with the land. The North Canterbury and Marlborough hills are steep, because the plate boundary keeps pushing them up, and much of the rock is fractured and weathered.
  2. On any slope, gravity pulls rock and soil downhill. Friction holds it in place.
  3. Strong shaking adds large, rapidly changing forces and loosens the material, so on thousands of slopes the downhill pull beat friction at the same moment.
  4. That is why one earthquake caused more than 10,000 landslides: steep slopes, weak rock and violent shaking all at once.
  5. When a landslide falls into a narrow valley, it can block the river. The water builds up behind it into a lake.
  6. A landslide dam is a loose pile of rock and soil, not an engineered dam. As the lake rises, water seeps through it or spills over the top and erodes it.
  7. If the dam gives way, all the stored water is released at once: a flood of water, mud and rock much bigger than the river's normal flow.
  8. That is the hazard downstream: sudden floods reaching houses, roads and farms with little warning.
  9. Heavy rain fills the lake faster and aftershocks can shake the dam, so the risk lasts for months and the dams have to be monitored.
Full working
  1. steep slopes from uplift, fractured and weathered rockalready close to failing
  2. gravity pulls downhill, friction holdsshaking tips the balance
  3. shaking on thousands of slopes at oncemore than 10,000 landslides
  4. landslides block riverswater builds up into a lake
  5. dam is loose debrisseepage or overtopping erodes it
  6. dam failure releases the lake at oncesudden flood of water, mud and rock downstream
  7. rain and aftershocks raise the riskdams monitored for months
Question Two

Question Two

a
Achieved

Ruapehu, in the central North Island, sits above a plate boundary.

Describe the plate boundary beneath the North Island. Name the two plates, describe the type of crust on each side of the boundary, and describe how the plates move.

Hint

One plate is under the Pacific Ocean, one carries most of New Zealand. Which one is denser?

Answer

Beneath the North Island the Pacific Plate and the Australian Plate meet at a convergent boundary, the Hikurangi subduction zone, off the east coast. The Pacific Plate there is made of oceanic crust, which is thin and dense. The Australian Plate carries the North Island and is made of continental crust, which is thicker and less dense. The plates move towards each other, and the denser Pacific Plate sinks (subducts) beneath the Australian Plate, going down to the west under the North Island.

Step by step
  1. Two plates meet under the North Island: the Pacific Plate and the Australian Plate.
  2. The boundary is the Hikurangi subduction zone, off the east coast of the North Island.
  3. The Pacific Plate here is oceanic crust: thin, made of dense rock such as basalt.
  4. The Australian Plate carries the North Island. It is continental crust: thicker and less dense.
  5. The plates move towards each other, so this is a convergent boundary.
  6. The denser oceanic Pacific Plate sinks beneath the Australian Plate. This is subduction, and it goes down westward under the North Island.
Full working
  1. Pacific Plate and Australian PlateHikurangi subduction zone off the east coast
  2. Pacific Plate: oceanic crust, thin and dense
  3. Australian Plate: continental crust, thicker and less dense
  4. plates move togetherthe denser Pacific Plate subducts under the Australian Plate
b
Merit

Ruapehu erupts andesitic magma.

Explain how subduction beneath the North Island produces the andesitic magma that erupts at Ruapehu.

Hint

Subduction alone does not melt rock. What does the sinking plate carry down with it, and what does that do to the melting point of the rock around it?

Answer

As the dense oceanic Pacific Plate subducts, it carries water down, held in its rocks and minerals. At depth the water is driven out into the hot mantle above the sinking plate, and water lowers the melting point of rock, so the mantle partly melts. This partial melting makes basaltic magma, which is less dense than the surrounding rock, so it rises. When it reaches the base of the continental crust of the Australian Plate, its heat melts some of that crust, which is rich in silica. Mixing with the melted crust raises the silica content of the magma, turning it into andesitic magma: intermediate in silica, sticky (viscous) and gas-rich.

Step by step
  1. The oceanic Pacific Plate is denser, so it sinks under the Australian Plate.
  2. It carries water down with it, locked in its rocks and minerals.
  3. Deep down, heat and pressure drive the water out into the hot mantle rock above the sinking plate.
  4. Water lowers the melting point of rock, so the mantle partly melts. This partial melting makes basaltic magma.
  5. Basaltic magma is less dense than the solid rock around it, so it rises.
  6. It collects under the continental crust of the Australian Plate. Its heat melts some of that crust, which is rich in silica.
  7. Mixing in the melted crust raises the silica content. The magma becomes andesitic: intermediate silica, sticky and gas-rich.
Full working
  1. dense oceanic plate subductscarries water down
  2. water released into the hot mantlelowers the melting point
  3. partial meltingbasaltic magma
  4. basaltic magma is less denseit rises
  5. melts silica-rich continental crustsilica content rises
  6. andesitic magma: intermediate silica, viscous, gas-rich
c
Excellence

Ruapehu is an andesitic stratovolcano with a crater lake at its summit. On 24 December 1953 a dam of volcanic ash holding back the crater lake collapsed. A lahar raced down the Whangaehu River and wrecked the rail bridge at Tangiwai just before a passenger train reached it. 151 people died.

Discuss how subduction beneath the North Island led to the lahar hazard at Ruapehu.

Hint

Build a chain: plate, magma, eruption style, volcano shape, crater lake, lahar. Each link needs a reason.

Answer

The dense oceanic Pacific Plate subducts beneath the continental Australian Plate. Water carried down by the sinking plate lowers the melting point of the mantle above it, so it partly melts into basaltic magma, which is less dense and rises. Under the North Island it melts silica-rich continental crust, becoming andesitic magma: sticky and gas-rich. Sticky, gassy magma erupts explosively as ash, and as short, thick lava flows that cool before they travel far. Layer upon layer of ash and lava builds a steep-sided stratovolcano, and the summit crater fills with water as a crater lake. Ash from earlier eruptions (in 1945) built up a dam at the lake's outlet, and the lake rose behind it. When the ash dam gave way, the lake water mixed with ash and rock and poured down the Whangaehu River as a lahar, a fast flow like wet concrete, which wrecked the Tangiwai bridge. So the hazard comes from the whole chain: without subduction there would be no andesitic magma, no steep stratovolcano with a crater lake and no loose ash to dam it. The same chain is still in place, so Ruapehu's crater lake is monitored and an alarm system now warns of lahars on the Whangaehu River.

Step by step
  1. Start at the plate boundary. The dense oceanic Pacific Plate sinks beneath the continental Australian Plate.
  2. Water from the sinking plate lowers the melting point of the mantle above it, so it partly melts. That basaltic magma is less dense, so it rises.
  3. Under the North Island it melts silica-rich continental crust. The magma becomes andesitic: sticky and full of gas.
  4. Sticky magma traps gas, so eruptions are often explosive, throwing out ash. The lava that does flow is thick and cools before it travels far.
  5. Over many eruptions, layers of ash and lava pile up into a steep-sided cone: a stratovolcano. Its summit crater fills with water as a crater lake.
  6. Ash from earlier eruptions (in 1945) built up a dam at the lake's outlet, and the lake rose behind it.
  7. On 24 December 1953 the ash dam gave way. The lake water picked up ash and rock and became a lahar: a fast flow like wet concrete.
  8. The lahar raced down the Whangaehu River and wrecked the rail bridge at Tangiwai just before a train reached it. 151 people died.
  9. Now link it all. Without subduction there is no andesitic magma, without andesite no steep stratovolcano with a crater lake, and without explosive ash eruptions no loose dam. Every link is needed for the lahar.
  10. The chain is still there, which is why Ruapehu's crater lake is watched and an alarm system now warns of lahars on the Whangaehu River.
Full working
  1. dense Pacific Plate subducts under the Australian Plate
  2. water lowers the melting pointpartial melting, basaltic magma rises
  3. melts silica-rich crustandesitic magma, sticky and gassy
  4. explosive ash eruptions and short thick lava flowssteep stratovolcano
  5. summit crater fillscrater lake
  6. ash dam from earlier eruptions holds back the lake
  7. dam failswater, ash and rock become a lahar down the Whangaehu
  8. no subduction, no andesite, no steep cone or crater lake, no ash damno lahar
Question Three

Question Three

a
Achieved

Describe a tsunami, and describe how it is different from an ordinary wave made by the wind.

Hint

Think about how much of the ocean moves, how long the waves are, and what starts them.

Answer

A tsunami is a series of waves caused by a sudden movement of a large volume of water, for example when an earthquake lifts or drops the sea floor, or a landslide or eruption pushes into the sea. A tsunami moves the whole water column, from the sea floor to the surface. Its wavelength is very long (often more than 100 km) and the time between waves can be many minutes, and in the deep ocean it is fast but only a metre or less high. A wind wave is made by wind blowing on the surface, moves only the water near the surface, and has a wavelength of metres to a few hundred metres with only seconds between waves.

Step by step
  1. A tsunami starts when a large volume of water is suddenly pushed: the sea floor lifts or drops in an earthquake, or a landslide or eruption moves into the sea.
  2. It is a series of waves, not just one, and the first is not always the biggest.
  3. A tsunami moves the whole water column, from the sea floor right up to the surface.
  4. Its wavelength is very long, often over 100 km, and there can be many minutes between one wave and the next.
  5. In the deep ocean it travels very fast but may be only a metre or less high, so a ship may not notice it.
  6. A wind wave is made by wind on the surface. It moves only the surface water, its wavelength is metres to a few hundred metres, and there are only seconds between waves.
Full working
  1. caused by a sudden push on a large volume of waterearthquake, landslide or eruption
  2. moves the whole water column, sea floor to surface
  3. very long wavelength, many minutes between wavesfast and low in deep water
  4. wind wave: surface water only, short wavelength, seconds between waves
b
Merit

A large earthquake on the Hikurangi subduction zone, off the east coast of the North Island, could cause a tsunami.

In the open ocean, 4000 m deep, a tsunami travels at about 700 kmh and may be less than 1 m high. Near the shore, 10 m deep, it slows to about 36 kmh.

Explain why the tsunami slows down and why it gets taller as it reaches the coast.

Hint

The speed of a tsunami depends on one thing about the ocean. Then think about what happens when the front of the wave slows but the back has not yet.

Answer

A tsunami's speed depends on the depth of the water: the deeper the water, the faster it travels (about 700 kmh where the ocean is 4000 m deep, about 36 kmh where it is 10 m deep). Near the coast the sea floor rises, so friction with the sea floor and the shallower water slow the front of the wave, while the back, still in deeper water, catches up. The waves bunch together, so the wavelength gets shorter. The same energy is now squeezed into a shorter, slower wave in a shallower column of water, so the height (amplitude) of the wave grows, which is why a tsunami less than 1 m high at sea can be many metres high at the shore.

Step by step
  1. A tsunami's speed depends on the depth of the water. The deeper the water, the faster it travels.
  2. So it is fast in the open ocean, about 700 kmh over 4000 m of water, and slow near the shore, about 36 kmh in 10 m of water.
  3. As the wave reaches the coast, the sea floor rises. The front of the wave is in shallower water and drags on the sea floor, so it slows first.
  4. The back of the wave is still in deeper water and moving faster, so it catches up. The waves bunch together and the wavelength gets shorter.
  5. The wave loses very little energy on the way. The same energy is squeezed into a shorter, slower wave in less water.
  6. So the energy has to go somewhere: the wave grows taller. Less than 1 m at sea can become many metres at the shore.
Full working
  1. speed depends on depth4000 m: about 700 kmh; 10 m: about 36 kmh
  2. sea floor rises near the coastthe front slows first
  3. the back catches upwaves bunch, wavelength shortens
  4. same energy in a shorter, slower waveamplitude grows
c
Excellence

GNS Science says a tsunami from a large Hikurangi subduction zone earthquake could reach parts of the east coast of the North Island about 10 minutes after the earthquake. A tsunami from a large earthquake off South America takes many hours to reach New Zealand.

The official advice is: "Long or strong, get gone."

Discuss why a local tsunami is more dangerous than a distant one, and why people on the east coast are told to move to high ground as soon as they feel a long or strong earthquake.

Hint

Compare the distance each tsunami has to travel, and how long an official warning takes. What tells you a local tsunami is coming, before any siren?

Answer

A local tsunami starts close to the coast. The Hikurangi subduction zone is just off the east coast, so even though the tsunami slows in shallower water, it has only a short distance to travel and could arrive in about 10 minutes. A distant tsunami from South America must cross the Pacific, which takes many hours even at around 700 kmh, so scientists have time to measure it and issue official warnings and people have time to evacuate. For a local tsunami there may be no time to confirm it or sound sirens before the first wave arrives. But the earthquake itself is a warning: an earthquake big enough to lift the sea floor and cause a tsunami shakes the coast for a long time or very strongly. So the advice is to treat a long (over a minute) or strong (hard to stand up) earthquake as the warning and move to high ground or inland at once, without waiting for an official alert. Waiting even a few minutes could leave no time to escape, and because a tsunami is a series of waves, people should stay away until the all-clear.

Step by step
  1. Start with distance. The Hikurangi subduction zone is just off the east coast, so a tsunami starting there has only a short way to travel.
  2. Even though it slows down in shallower water near the coast, it could arrive in about 10 minutes.
  3. A tsunami from South America has to cross the whole Pacific Ocean. Even at about 700 kmh, that takes many hours.
  4. Those hours let scientists measure the tsunami, warn the country, and give people time to leave.
  5. A local tsunami gives no such time. There may be no chance to confirm it, or to sound sirens, before the first wave arrives.
  6. But the earthquake is itself the warning. An earthquake big enough to move the sea floor shakes the coast for a long time, or very strongly.
  7. So the advice is: if an earthquake is long (more than a minute) or strong (hard to stand up), get gone to high ground or inland at once. Don't wait for an official warning.
  8. A tsunami is a series of waves, and the first may not be the biggest, so stay away until the all-clear.
Full working
  1. Hikurangi source just offshoreshort distance, about 10 minutes
  2. South American source across the Pacificmany hours at about 700 kmh
  3. distant: time to measure, warn and evacuate
  4. local: may be no time for an official warning or sirens
  5. a long or strong earthquake is the natural warning
  6. move to high ground at oncea series of waves, wait for the all-clear

All NCEA Level 2 Science

A Vertex Academy practice paper, written from NZQA's 2026 assessment specification for AS 91191. It is not an NZQA paper. Grades use the 2025 exam's cut scores: 7, 13 and 19 out of 24 for Achieved, Merit and Excellence.