Level 2 Earth and Space Science stars and planetary systems practice paper 2026
Question One
Sirius A, the brightest star in our night sky, and Proxima Centauri, the closest star to the Sun, are both main sequence stars.
• Sirius A: surface temperature 9940 K, 25 times as luminous as the Sun, 2.1 solar masses.
• Proxima Centauri: 3040 K, 0.0017 times as luminous as the Sun, 0.12 solar masses.
Describe the colour of each star, and use an HR diagram to describe where each one sits on it.
Hint
Colour follows temperature: hot stars are blue-white, cool stars are red. On an HR diagram, temperature runs from hot on the left to cool on the right.
Answer
A star's colour depends on its surface temperature. Sirius A, at about 9940 K, is hot, so it is blue-white. Proxima Centauri, at about 3040 K, is cool, so it is red (a red dwarf). On an HR diagram hot stars are on the left and luminous stars at the top, so Sirius A sits towards the upper left of the main sequence and Proxima Centauri towards the lower right. Both are on the main sequence, the band from upper left to lower right, because both are fusing hydrogen into helium in their cores.
Step by step
- A star's colour comes from its surface temperature. Hotter stars give off more blue light; cooler stars more red.
- Sirius A is about 9940 K, so it is blue-white.
- Proxima Centauri is about 3040 K, so it is red. It is a red dwarf.
- On an HR diagram, temperature is along the bottom, hot on the left and cool on the right. Luminosity goes up the side.
- Sirius A is hot and luminous, so it sits towards the upper left of the main sequence.
- Proxima is cool and dim, so it sits towards the lower right.
- Both are on the main sequence, the band running from upper left to lower right, because both are fusing hydrogen into helium in their cores.
Full working
- colour depends on surface temperature
- Sirius A 9940 Kblue-white
- Proxima Centauri 3040 Kred, a red dwarf
- HR diagram: hot on the left, luminous at the top
- Sirius A upper left, Proxima lower rightboth on the main sequence, fusing hydrogen
Sirius A is about 15 000 times as luminous as Proxima Centauri.
Explain why Sirius A is so much more luminous. Include what luminosity means, and the role of each star's mass.
Hint
Luminosity is energy per second. What does a bigger mass do to the gravity, and so to the core where fusion happens?
Answer
Luminosity is the total energy a star gives out each second. Sirius A has about 17 times the mass of Proxima Centauri, so its gravity is much stronger. The stronger gravity squeezes its core harder, making the core hotter and denser, so hydrogen fuses into helium much faster and far more energy is released each second. Sirius A is also hotter at its surface (9940 K against 3040 K) and larger, so each square metre of its surface gives out more energy and it has many more square metres. Together these make it about 15 000 times as luminous.
Step by step
- Luminosity is the total energy a star gives out every second.
- Sirius A is about 2.1 solar masses and Proxima 0.12, so Sirius A has about 17 times the mass.
- More mass means stronger gravity, which squeezes the core harder. The core becomes hotter and denser.
- In a hotter, denser core, hydrogen fuses into helium much faster, so far more energy is released every second.
- That energy comes out through the surface. Sirius A's surface is hotter, so each square metre gives out more energy, and the star is bigger, so it has more square metres.
- Check the ratio: 25 ÷ 0.0017 is about 15 000. Mass drives it all.
Full working
- luminosity: total energy given out per second
- Sirius A 2.1 solar masses, Proxima 0.12about 17 times the mass
- more mass, stronger gravityhotter, denser core
- faster hydrogen fusionmore energy per second
- hotter, larger surface gives out more energy25 ÷ 0.0017 ≈ 15 000
From New Zealand, Sirius is the brightest star in the night sky, with an apparent magnitude of −1.5. Proxima Centauri is closer, 4.2 light years away compared with 8.6 for Sirius, but it cannot be seen without a telescope: its apparent magnitude is 11.1.
Their absolute magnitudes are 1.4 for Sirius A and 15.5 for Proxima Centauri.
Discuss why the closer star looks so much fainter. Include what apparent and absolute magnitude measure.
Hint
Remember the magnitude scale runs backwards: smaller numbers are brighter. Absolute magnitude imagines every star at the same distance.
Answer
Apparent magnitude is how bright a star looks from Earth. Absolute magnitude is how bright it would look from a standard distance of 10 parsecs (about 32.6 light years), so it compares the stars' real luminosities. On both scales a smaller (or more negative) number means brighter, and each step of 5 magnitudes is a factor of 100 in brightness. Sirius A's absolute magnitude (1.4) is about 14 magnitudes brighter than Proxima's (15.5), so if they were side by side Sirius A would look hundreds of thousands of times brighter; this is because Sirius A is far more massive and luminous. Distance does make a difference: Proxima is about half as far away, which makes it look about 4 times brighter than it would at Sirius's distance, since brightness falls with the square of distance. But a factor of 4 is tiny compared with the huge difference in luminosity, so Proxima still looks far fainter (apparent magnitude 11.1, too faint for the eye, compared with −1.5 for Sirius). How bright a star looks depends on both its luminosity and its distance, and here luminosity wins.
Step by step
- Apparent magnitude is how bright a star looks from Earth. Absolute magnitude is how bright it would look if every star were at the same distance, 10 parsecs (about 32.6 light years).
- So absolute magnitude compares what the stars are really like. Apparent magnitude mixes in how far away they are.
- The scale runs backwards: smaller numbers are brighter, and negative numbers are brightest of all. Five magnitudes is a factor of 100.
- Sirius A's absolute magnitude is 1.4; Proxima's is 15.5. That is about 14 magnitudes: side by side, Sirius A would look hundreds of thousands of times brighter.
- That gap comes from luminosity: Sirius A is much more massive, so it fuses hydrogen far faster and gives out far more energy.
- Distance pulls the other way. Brightness falls with the square of distance, and Proxima is about half as far, so it looks about 4 times brighter than it would at Sirius's distance.
- But a factor of 4 is tiny next to the luminosity gap. So Proxima still looks much fainter: magnitude 11.1, too faint for the eye, against −1.5 for Sirius.
- So how bright a star looks depends on luminosity and distance together, and here luminosity wins.
Full working
- apparent magnitude: how bright it looks from Earth
- absolute magnitude: how bright at 10 parsecscompares luminosity
- smaller number is brighter5 magnitudes = factor of 100
- absolute 1.4 against 15.5Sirius A far more luminous, from its mass
- Proxima about half as farabout 4 times brighter for distance only
- luminosity outweighs distanceapparent −1.5 against 11.1
Question Two
Describe how a star forms from a cloud of gas and dust, and describe when it becomes a main sequence star.
Hint
Gravity starts it. What happens to the temperature as the cloud collapses, and what starts in the centre?
Answer
A star forms in a cold cloud of gas (mostly hydrogen) and dust called a nebula. Gravity pulls part of the cloud together, and as it collapses it spins faster and heats up, forming a hot, dense protostar. The protostar keeps contracting and heating until its core is hot enough (about 10 million K) for hydrogen nuclei to fuse into helium. The energy released by fusion pushes outward and balances gravity, so the star stops contracting and becomes a stable main sequence star.
Step by step
- Stars form in a nebula: a cold cloud of gas, mostly hydrogen, and dust.
- Gravity pulls part of the cloud together. As it collapses, it heats up and spins faster.
- The hot, dense ball at the centre is a protostar. It keeps contracting and getting hotter.
- When the core reaches about 10 million K, hydrogen nuclei start fusing into helium.
- Fusion releases energy that pushes outward. When that outward push balances gravity's inward pull, the star stops shrinking: it is a main sequence star.
Full working
- nebula: cold cloud of hydrogen gas and dust
- gravity collapses itit heats up and spins
- protostar contracts and heats
- core about 10 million Khydrogen fuses into helium
- fusion pushes out, gravity pulls inbalanced: main sequence
The Sun is a main sequence star of 1 solar mass. In about 5 billion years it will run out of hydrogen in its core.
Explain how the Sun will change after its core runs out of hydrogen, and what will be left at the end.
Hint
When fusion in the core slows, gravity gets the upper hand. What happens to the core, and what happens to the outer layers?
Answer
When the hydrogen in the Sun's core runs out, fusion there stops, so the outward push weakens and gravity makes the core contract and heat up. Hydrogen keeps fusing in a shell around the core, and the extra energy makes the outer layers swell and cool: the Sun becomes a red giant, larger, more luminous and redder. The core gets hot enough to fuse helium into carbon. The Sun does not have enough mass to fuse anything heavier, so when the helium runs out its outer layers drift away as a planetary nebula, and the hot, dense core left behind is a white dwarf, which slowly cools.
Step by step
- When the core's hydrogen runs out, fusion in the core stops, so there is less energy pushing outward.
- Gravity wins for a while: the core contracts and heats up.
- Hydrogen keeps fusing in a shell around the core. The extra energy makes the outer layers swell and cool.
- The Sun becomes a red giant: much bigger, more luminous, and redder because its surface is cooler.
- The hotter core fuses helium into carbon.
- The Sun is not massive enough to fuse heavier elements. When the helium runs out, its outer layers drift off as a planetary nebula.
- The core left behind is a white dwarf: small, hot and dense, cooling slowly over billions of years.
Full working
- core hydrogen runs outfusion in the core stops
- gravity contracts and heats the core
- shell fusion swells the outer layersred giant, cooler surface
- core fuses helium into carbon
- not enough mass for heavier elementsouter layers drift off as a planetary nebula
- core left as a white dwarf
A main sequence star has 15 times the mass of the Sun.
Discuss how gravity and fusion control this star's life, from the main sequence to what is left after it dies.
Hint
Every stage is a tug of war between gravity pulling in and energy from fusion pushing out. What happens when fusion can no longer release energy?
Answer
On the main sequence, gravity pulls the star inward and the energy released by fusing hydrogen into helium pushes outward, and the two balance. With 15 times the Sun's mass, its gravity is much stronger, so its core is hotter and denser and it fuses hydrogen far faster: it is very luminous but lives only millions of years, not billions like the Sun. When the core's hydrogen runs out, gravity makes the core contract and heat up until it can fuse helium, then heavier elements in turn, up to iron, while the star swells into a red supergiant. Fusing iron takes in energy rather than releasing it, so fusion in the core stops and nothing holds gravity back: the core collapses in less than a second, and the rebound blasts the outer layers into space as a supernova. What is left depends on the mass of the core: if it is less than about 3 solar masses it becomes a neutron star, an extremely dense ball of neutrons; if it is more, gravity is so strong that nothing can stop the collapse and it becomes a black hole.
Step by step
- On the main sequence there is a balance: gravity pulls in, and the energy from hydrogen fusion pushes out.
- This star has 15 times the Sun's mass, so its gravity is much stronger. Its core is hotter and denser.
- So it fuses hydrogen much faster. It is very luminous, but it lives only millions of years, not billions.
- When the core runs out of hydrogen, gravity contracts the core and heats it. Now it can fuse helium, then heavier elements in turn, up to iron.
- Meanwhile the outer layers swell: the star becomes a red supergiant.
- Fusing iron takes in energy instead of releasing it. Fusion in the core stops, and nothing holds gravity back.
- The core collapses in less than a second. The rebound blasts the outer layers into space: a supernova.
- What remains depends on the core's mass. Under about 3 solar masses, it becomes a neutron star: neutrons packed incredibly tightly.
- Over about 3 solar masses, gravity is so strong that nothing can stop the collapse: a black hole.
- So at every stage, the star's fate is set by gravity against the energy of fusion, and by mass.
Full working
- main sequence: gravity in, fusion energy outbalanced
- 15 solar masses: strong gravity, hot dense corefast fusion, millions of years
- core hydrogen gonecontracts, heats, fuses heavier elements up to iron
- outer layers swellred supergiant
- iron fusion takes in energyfusion stops, core collapses
- rebound blasts the outer layerssupernova
- core under about 3 solar masses: neutron starover: black hole
Question Three
Our solar system formed from a protoplanetary disc around the young Sun.
Describe what a protoplanetary disc is, and describe how planets formed in it.
Hint
It is what is left of the cloud the Sun formed from. How do small grains turn into planets?
Answer
A protoplanetary disc is a flat, spinning disc of gas and dust around a young star, left over from the cloud the star formed from. In the disc, dust grains collided and stuck together, building larger and larger clumps (accretion). Clumps grew into planetesimals, kilometres across, whose gravity pulled in more material, until some grew into planets.
Step by step
- A protoplanetary disc is a flat, spinning disc of gas and dust around a young star. It is what is left of the cloud the star formed from.
- It is flat because the cloud was spinning as it collapsed, and spinning flattened it.
- Inside the disc, dust grains collided and stuck together, making bigger and bigger clumps. This is accretion.
- Clumps grew into planetesimals, kilometres across. Their gravity then pulled in more material.
- Some of them grew large enough to become planets.
Full working
- protoplanetary disc: flat spinning disc of gas and dust round a young star
- dust grains collide and stickaccretion
- planetesimals formgravity pulls in more material
- the largest grow into planets
The four inner planets, Mercury to Mars, are small and rocky. The four outer planets, Jupiter to Neptune, are large and made mostly of gas and ice.
Explain why the inner and outer planets are so different.
Hint
How did the temperature of the disc change with distance from the young Sun? What could freeze, and where?
Answer
Close to the young Sun the disc was hot, so only materials with high melting points, such as rock and metal, could stay solid. There was little of these, so the inner planets grew from a small amount of solid material and stayed small and rocky; the Sun's heat and solar wind also drove the lighter gases away from them. Beyond the frost line, further out, it was cold enough for water, ammonia and methane to freeze into ice, so there was much more solid material. The outer planets' cores grew large quickly, and their strong gravity pulled in huge amounts of hydrogen and helium gas, making them giants.
Step by step
- The young Sun heated the disc, so the disc was hot near the Sun and cold further out.
- Near the Sun, only rock and metal could stay solid. There was not much of them, so the inner planets stayed small and rocky.
- The Sun's heat and solar wind also drove light gases away from the inner region.
- Further out, beyond the frost line, it was cold enough for water, ammonia and methane to freeze into ice.
- Ice added a lot more solid material, so the outer planets' cores grew big, fast.
- Big cores have strong gravity, so they pulled in huge amounts of hydrogen and helium gas. That is why the outer planets are giants.
Full working
- disc hot near the Sun, cold far away
- near the Sun: only rock and metal solidsmall rocky planets
- beyond the frost line: ices freeze toomuch more solid material
- large cores, strong gravitypull in hydrogen and helium: giant planets
Most large moons orbit in the same direction as their planet spins (prograde). Neptune's largest moon, Triton, orbits in the opposite direction (retrograde), on an orbit tilted steeply to Neptune's equator. Triton's make-up is similar to Pluto and other icy bodies of the Kuiper Belt.
Discuss which theory of moon formation best explains Triton: accretion, capture or collision. Use the evidence to support your answer and to rule out the other theories.
Hint
A moon that formed with its planet, from the same spinning disc, would orbit which way? What would a moon caught from somewhere else look like?
Answer
Capture best explains Triton. A moon that formed by accretion from the same spinning disc of material as its planet would orbit in the same direction as the planet spins, close to the planet's equator, and that is what most large moons do. A collision moon forms from debris thrown into orbit around the planet, which also ends up orbiting in the direction the material was moving, in a disc round the planet, and would be made of material from the planet and the impactor. Triton orbits backwards (retrograde) on a steeply tilted orbit, which does not fit either a moon that formed from the planet's disc or from collision debris. Its make-up is like Pluto and other Kuiper Belt objects, which suggests it formed out in the Kuiper Belt and was later caught by Neptune's gravity. A captured object can arrive from any direction, so it can end up going round backwards and on a tilted orbit. So the evidence of its orbit and its make-up supports capture and rules out accretion and collision.
Step by step
- Start with what each theory predicts.
- Accretion: the moon forms from the same spinning disc as its planet, so it orbits the way the planet spins, near the planet's equator.
- Collision: debris thrown out by a giant impact forms a disc around the planet, and the moon collects from it. It also orbits in the direction of the disc, and is made of planet and impactor material.
- Capture: an object formed somewhere else wanders close and is caught by the planet's gravity. It can come from any direction, so its orbit can be backwards and tilted.
- Now the evidence. Triton orbits backwards (retrograde), steeply tilted to Neptune's equator. That does not fit accretion or collision.
- Triton is made of material like Pluto and other Kuiper Belt objects, which formed beyond Neptune.
- So Triton most likely formed in the Kuiper Belt and was later captured by Neptune's gravity.
- Both pieces of evidence point the same way: capture explains Triton, and the other two theories are ruled out.
Full working
- accretion: forms from the planet's discprograde, near the equator
- collision: forms from impact debris discprograde, planet-like material
- capture: caught from elsewhereany direction, can be retrograde and tilted
- Triton: retrograde and steeply tiltedrules out accretion and collision
- make-up like Pluto and Kuiper Belt objectsformed elsewhere
- best explained by capture
A Vertex Academy practice paper, written from NZQA's 2026 assessment specification for AS 91192. It is not an NZQA paper. Grades use the 2025 exam's cut scores: 7, 13 and 19 out of 24 for Achieved, Merit and Excellence.