Vertex Learn

Level 2 Physics electricity practice paper 2026

Question One

Question One

a
Achieved

Two parallel metal plates in a school lab are 0.020 m apart, with 500 V across them.

Use E = V ÷ d.

Calculate the electric field strength between the plates.

Hint

Use the distance in metres.

Answer

E = 500 ÷ 0.020 = 25 000 V m⁻¹ (2.5 × 10⁴ V m⁻¹).

Step by step
  1. E = V ÷ d.
  2. E = 500 ÷ 0.020 = 25 000 V m⁻¹.
Full working
  1. E = V ÷ d
  2. E = 500 ÷ 0.020 = 2.5 × 10⁴ V m⁻¹
b
Achieved

An electron (charge 1.6 × 10⁻¹⁹ C) is between the plates of part (a), where the field strength is 2.5 × 10⁴ V m⁻¹.

Use F = Eq.

Calculate the size of the force on the electron and state its direction.

Hint

An electron is negative, so the force is opposite to the field direction.

Answer

F = 2.5 × 10⁴ × 1.6 × 10⁻¹⁹ = 4.0 × 10⁻¹⁵ N, towards the positive plate.

Step by step
  1. F = Eq = 2.5 × 10⁴ × 1.6 × 10⁻¹⁹ = 4.0 × 10⁻¹⁵ N.
  2. The field points from the positive plate to the negative plate. The electron is negative, so it is pushed the other way: towards the positive plate.
Full working
  1. F = Eq = 2.5 × 10⁴ × 1.6 × 10⁻¹⁹
  2. F = 4.0 × 10⁻¹⁵ N, towards the positive plate
c
Merit

The electron in part (b) starts at rest at the negative plate and moves all the way across the 0.020 m gap to the positive plate. The field strength is 2.5 × 10⁴ V m⁻¹.

Use ΔEp = Eqd.

Calculate the energy the electron gains crossing the gap, and explain why the force on it is the same everywhere between the plates.

Hint

The electric potential energy it loses becomes kinetic energy.

Answer

ΔEp = 2.5 × 10⁴ × 1.6 × 10⁻¹⁹ × 0.020 = 8.0 × 10⁻¹⁷ J, which becomes the electron's kinetic energy. Between parallel plates the field is uniform: the field lines are parallel and evenly spaced, so E has the same size and direction everywhere (except near the edges). Since F = Eq and the charge is fixed, the force is the same everywhere between the plates.

Step by step
  1. ΔEp = Eqd = 2.5 × 10⁴ × 1.6 × 10⁻¹⁹ × 0.020 = 8.0 × 10⁻¹⁷ J.
  2. The electron loses that much electric potential energy, so it gains 8.0 × 10⁻¹⁷ J of kinetic energy.
  3. The field between parallel plates is uniform: parallel, evenly spaced field lines.
  4. F = Eq with E and q both constant, so the force is constant across the gap.
Full working
  1. ΔEp = Eqd
  2. ΔEp = 2.5 × 10⁴ × 1.6 × 10⁻¹⁹ × 0.020 = 8.0 × 10⁻¹⁷ J
  3. uniform field: E constantF = Eq constant
d
Excellence

In a version of Millikan's experiment, an oil drop of mass 3.2 × 10⁻¹⁵ kg floats at rest between two horizontal plates 0.020 m apart when the voltage across them is 980 V. The drop carries extra electrons (each 1.6 × 10⁻¹⁹ C).

Use F = mg with g = 9.8 m s⁻², E = V ÷ d and F = Eq.

Calculate the charge on the drop and how many extra electrons it carries, and state which plate must be positive. Explain what happens to the drop if the voltage is increased.

Hint

The drop is at rest, so the electric force up balances the weight down.

Answer

Weight = 3.2 × 10⁻¹⁵ × 9.8 = 3.14 × 10⁻¹⁴ N. E = 980 ÷ 0.020 = 4.9 × 10⁴ V m⁻¹. The forces balance: Eq = mg, so q = 3.14 × 10⁻¹⁴ ÷ 4.9 × 10⁴ = 6.4 × 10⁻¹⁹ C, which is 6.4 × 10⁻¹⁹ ÷ 1.6 × 10⁻¹⁹ = 4 extra electrons. The drop is negative and the electric force on it must point up, so the field points down: the top plate is positive. If the voltage increases, E and so the upward force Eq increase while the weight stays the same; the net force is upwards, so the drop accelerates upwards towards the top plate.

Step by step
  1. The drop is at rest, so the forces are balanced: upward electric force = weight.
  2. Weight: mg = 3.2 × 10⁻¹⁵ × 9.8 = 3.14 × 10⁻¹⁴ N.
  3. Field: E = V ÷ d = 980 ÷ 0.020 = 4.9 × 10⁴ V m⁻¹.
  4. Eq = mg, so q = 3.14 × 10⁻¹⁴ ÷ 4.9 × 10⁴ = 6.4 × 10⁻¹⁹ C.
  5. Number of electrons = 6.4 × 10⁻¹⁹ ÷ 1.6 × 10⁻¹⁹ = 4.
  6. A negative charge feels a force opposite to the field. The force is up, so the field is down: top plate positive.
  7. More voltage gives a stronger field and a bigger upward force; the weight is unchanged, so there is a net upward force and the drop accelerates up.
Full working
  1. mg = 3.2 × 10⁻¹⁵ × 9.8 = 3.14 × 10⁻¹⁴ N
  2. E = 980 ÷ 0.020 = 4.9 × 10⁴ V m⁻¹
  3. q = mg ÷ E = 6.4 × 10⁻¹⁹ C
  4. 6.4 × 10⁻¹⁹ ÷ 1.6 × 10⁻¹⁹ = 4 electronstop plate positive
  5. V up: Eq > mgaccelerates upwards
Question Two

Question Two

a
Achieved

A heater circuit has a 12 V battery, a 4.0 Ω resistor R₁ in series, and then two resistors in parallel: R₂ = 6.0 Ω and R₃ = 12 Ω. The connecting wires and battery have no resistance.

Use 1Rp = 1R₂ + 1R₃, and add resistances in series.

Calculate the total resistance of the circuit.

+12 VR₁ = 4.0 ΩR₂ = 6.0 ΩR₃ = 12 Ω
Hint

Combine the parallel pair first, then add R₁ in series.

Answer

1Rp = 16.0 + 112 = 0.25, so Rp = 4.0 Ω. Total = 4.0 + 4.0 = 8.0 Ω.

Step by step
  1. Parallel pair: 1Rp = 16.0 + 112 = 0.167 + 0.083 = 0.25, so Rp = 4.0 Ω.
  2. R₁ is in series with the pair: R = 4.0 + 4.0 = 8.0 Ω.
Full working
  1. 1Rp = 16.0 + 112 = 0.25
  2. Rp = 4.0 Ω
  3. R total = 4.0 + 4.0 = 8.0 Ω
b
Achieved

The circuit in the diagram has a 12 V battery and a total resistance of 8.0 Ω.

Use V = IR.

Calculate the current from the battery.

+12 VR₁ = 4.0 ΩR₂ = 6.0 ΩR₃ = 12 Ω
Hint

Use the battery voltage and the total resistance.

Answer

I = 12 ÷ 8.0 = 1.5 A.

Step by step
  1. V = IR, so I = V ÷ R.
  2. I = 12 ÷ 8.0 = 1.5 A.
Full working
  1. I = V ÷ R = 12 ÷ 8.0
  2. I = 1.5 A
c
Merit

In the circuit in the diagram, 1.5 A flows from the 12 V battery.

Use V = IR and P = I²R.

Calculate the voltage across the parallel pair, the current in each of R₂ and R₃, and the power in R₁.

+12 VR₁ = 4.0 ΩR₂ = 6.0 ΩR₃ = 12 Ω
Hint

Find the voltage across R₁ first; what is left of the 12 V is across the parallel pair.

Answer

V₁ = 1.5 × 4.0 = 6.0 V, so the parallel pair has 12 − 6.0 = 6.0 V. I₂ = 6.0 ÷ 6.0 = 1.0 A and I₃ = 6.0 ÷ 12 = 0.50 A (they add to 1.5 A). P₁ = 1.5² × 4.0 = 9.0 W.

Step by step
  1. Voltage across R₁: V = IR = 1.5 × 4.0 = 6.0 V.
  2. The voltages in series add to 12 V, so the parallel pair has 12 − 6.0 = 6.0 V across it.
  3. R₂: I = 6.0 ÷ 6.0 = 1.0 A. R₃: I = 6.0 ÷ 12 = 0.50 A. Check: 1.0 + 0.50 = 1.5 A.
  4. Power in R₁: P = I²R = 1.5² × 4.0 = 9.0 W.
Full working
  1. V₁ = 1.5 × 4.0 = 6.0 V
  2. V parallel = 12 − 6.0 = 6.0 V
  3. I₂ = 1.0 A, I₃ = 0.50 A
  4. P₁ = 1.5² × 4.0 = 9.0 W
d
Excellence

In the circuit in the diagram, R₃ (12 Ω) burns out and stops conducting. Before that, the power in R₁ was 9.0 W and the power in R₂ was 6.0 W.

Use V = IR and P = I²R.

Calculate the new power in R₁ and in R₂, and explain why one goes up and the other goes down.

+12 VR₁ = 4.0 ΩR₂ = 6.0 ΩR₃ = 12 Ω
Hint

Without R₃ the circuit is just R₁ and R₂ in series. Find the new total resistance and current.

Answer

Now R = 4.0 + 6.0 = 10 Ω, so I = 12 ÷ 10 = 1.2 A through both. P₁ = 1.2² × 4.0 = 5.8 W (down from 9.0 W). P₂ = 1.2² × 6.0 = 8.6 W (up from 6.0 W). Removing a parallel branch raises the total resistance (8.0 to 10 Ω), so the battery current falls from 1.5 A to 1.2 A and R₁ gets less power. But all of that current now goes through R₂ (1.2 A instead of 1.0 A), and R₂'s voltage rises from 6.0 V to 7.2 V, because R₁ takes a smaller share of the 12 V; so R₂ gets more power.

Step by step
  1. With R₃ gone, R₁ and R₂ are in series: R = 4.0 + 6.0 = 10 Ω.
  2. I = 12 ÷ 10 = 1.2 A, the same through R₁ and R₂.
  3. P₁ = 1.2² × 4.0 = 5.76 W, about 5.8 W: down from 9.0 W.
  4. P₂ = 1.2² × 6.0 = 8.64 W, about 8.6 W: up from 6.0 W.
  5. The total resistance went up, so the total current fell: R₁ carries less current and gets less power.
  6. R₂ now carries the whole current (1.2 A, up from 1.0 A). The voltage across R₁ fell (4.8 V), so R₂ has 12 − 4.8 = 7.2 V, up from 6.0 V. More current and more voltage: more power.
Full working
  1. R = 4.0 + 6.0 = 10 Ω
  2. I = 12 ÷ 10 = 1.2 A
  3. P₁ = 1.2² × 4.0 = 5.8 Wdown
  4. P₂ = 1.2² × 6.0 = 8.6 Wup
  5. V₂ = 12 − 4.8 = 7.2 V
Question Three

Question Three

a
Achieved

A 0.25 m length of wire in a model motor carries a current of 3.0 A due north. It sits in a magnetic field of 0.40 T that points vertically downwards.

Use F = BIL.

Calculate the size of the force on the wire and state its direction.

Hint

Use the right-hand rule (or the right-hand slap rule) with the current north and the field down.

Answer

F = 0.40 × 3.0 × 0.25 = 0.30 N, pointing west.

Step by step
  1. The current is at right angles to the field, so F = BIL.
  2. F = 0.40 × 3.0 × 0.25 = 0.30 N.
  3. Right-hand rule: fingers along the field (down), thumb along the current (north): the palm pushes west.
Full working
  1. F = BIL = 0.40 × 3.0 × 0.25
  2. F = 0.30 N, west
b
Achieved

A proton (charge 1.6 × 10⁻¹⁹ C) moves at 2.0 × 10⁶ m s⁻¹ at right angles to a magnetic field of 0.50 T.

Use F = Bqv.

Calculate the force on the proton.

Hint

Multiply the three values; the proton moves at right angles to the field.

Answer

F = 0.50 × 1.6 × 10⁻¹⁹ × 2.0 × 10⁶ = 1.6 × 10⁻¹³ N.

Step by step
  1. F = Bqv = 0.50 × 1.6 × 10⁻¹⁹ × 2.0 × 10⁶.
  2. F = 1.6 × 10⁻¹³ N, at right angles to both the velocity and the field.
Full working
  1. F = Bqv = 0.50 × 1.6 × 10⁻¹⁹ × 2.0 × 10⁶
  2. F = 1.6 × 10⁻¹³ N
c
Merit

A metal rod 0.30 m long slides at a steady 4.0 m s⁻¹ along two metal rails, at right angles to a magnetic field of 0.60 T. The rails are joined at one end, so the rod is part of a circuit with a total resistance of 1.8 Ω.

Use V = BvL and V = IR.

Calculate the voltage induced across the rod and the current in the circuit, and explain why a voltage is induced.

Hint

Think about the free electrons inside the moving rod: they are charges moving through a magnetic field.

Answer

V = 0.60 × 4.0 × 0.30 = 0.72 V and I = 0.72 ÷ 1.8 = 0.40 A. The free electrons in the rod move with it through the magnetic field, so each feels a force F = Bqv along the length of the rod. The electrons are pushed towards one end, which becomes negative while the other end becomes positive: a voltage across the rod. Joined to the rails, this pushes a current around the circuit.

Step by step
  1. V = BvL = 0.60 × 4.0 × 0.30 = 0.72 V.
  2. I = V ÷ R = 0.72 ÷ 1.8 = 0.40 A.
  3. The rod's free electrons move through the field with the rod, so each feels a magnetic force, Bqv, along the rod.
  4. Electrons build up at one end (negative) and leave the other end positive: a potential difference across the rod.
  5. In a complete circuit this voltage drives a current.
Full working
  1. V = BvL = 0.60 × 4.0 × 0.30 = 0.72 V
  2. I = 0.72 ÷ 1.8 = 0.40 A
  3. electrons moving in B feel F = Bqv along the rodcharge separates
d
Excellence

The rod in part (c) (0.30 m long, moving at 4.0 m s⁻¹ in 0.60 T) carries an induced current of 0.40 A.

Use F = BIL and P = Fv and P = VI.

The induced current makes the field push on the rod. Calculate this force and explain its direction. Show that the power needed to keep the rod moving at a steady speed equals the electrical power in the circuit, and explain what this shows.

Hint

The induced current is in a magnetic field, so it feels a force. Which way must it point if energy is conserved?

Answer

F = BIL = 0.60 × 0.40 × 0.30 = 0.072 N. It opposes the rod's motion: the induced current always flows in the direction that opposes the change producing it (Lenz's law). If the force pushed the rod forwards, the rod would speed up by itself and make energy from nothing. To keep the rod at a steady speed, a 0.072 N push is needed: P = Fv = 0.072 × 4.0 = 0.29 W (0.288 W). The electrical power is P = VI = 0.72 × 0.40 = 0.29 W (0.288 W). They are equal: the work done pushing the rod becomes electrical energy, which becomes heat in the resistance. Energy is conserved; this is how a generator works.

Step by step
  1. The rod carries 0.40 A across the field, so F = BIL = 0.60 × 0.40 × 0.30 = 0.072 N.
  2. This force acts against the motion (Lenz's law): the induced current opposes the change that causes it.
  3. If it helped the motion, the rod would speed up by itself, creating energy from nothing.
  4. Steady speed means balanced forces, so the push is 0.072 N. Power: P = Fv = 0.072 × 4.0 = 0.288 W.
  5. Electrical power: P = VI = 0.72 × 0.40 = 0.288 W.
  6. The two are equal: the mechanical work done on the rod is turned into electrical energy (then heat). Energy is conserved.
Full working
  1. F = BIL = 0.60 × 0.40 × 0.30 = 0.072 Nopposes motion
  2. P mechanical = Fv = 0.072 × 4.0 = 0.288 W
  3. P electrical = VI = 0.72 × 0.40 = 0.288 W
  4. equalwork done becomes electrical energy

All NCEA Level 2 Science

A Vertex Academy practice paper, written from NZQA's 2026 assessment specification for AS 91173. It is not an NZQA paper. Grades use the 2025 exam's cut scores: 8, 14 and 19 out of 24 for Achieved, Merit and Excellence.