Vertex Learn

Level 2 Physics waves practice paper 2026

Question One

Question One

a
Achieved

A diver in Lake Taupō shines a torch up towards the surface. The light travels from water (n = 1.33) into air (n = 1.00).

One ray meets the surface at 30° to the normal.

Use n₁ sin θ₁ = n₂ sin θ₂.

Calculate the angle of refraction in the air.

Hint

Put the water values on the left: n₁ = 1.33, θ₁ = 30°. The air is n₂ = 1.00. Then solve for sin θ₂.

Answer

sin θ₂ = 1.33 × sin 30° ÷ 1.00 = 0.665, so θ₂ = 42° (41.7°) from the normal.

Step by step
  1. The light goes from water (n₁ = 1.33) to air (n₂ = 1.00), meeting the surface at θ₁ = 30°.
  2. Snell's law: n₁ sin θ₁ = n₂ sin θ₂, so sin θ₂ = n₁ sin θ₁ ÷ n₂.
  3. sin θ₂ = 1.33 × 0.500 ÷ 1.00 = 0.665.
  4. θ₂ = sin⁻¹ 0.665 = 41.7°, about 42° from the normal. It bends away from the normal because air has the lower refractive index.
Full working
  1. n₁ sin θ₁ = n₂ sin θ₂
  2. 1.33 × sin 30° = 1.00 × sin θ₂
  3. sin θ₂ = 0.665
  4. θ₂ = 42° (41.7°)
b
Achieved

Light in the water of Lake Taupō (n = 1.33) meets the surface with air (n = 1.00).

Use sin θc = n₂ ÷ n₁.

Calculate the critical angle for light going from the water into the air.

Hint

The critical angle is the angle of incidence that gives an angle of refraction of 90°. Here n₁ is the water and n₂ the air.

Answer

sin θc = 1.00 ÷ 1.33 = 0.752, so θc = 48.8° (about 49°).

Step by step
  1. The critical angle is the angle of incidence in the denser medium for which the refracted ray runs along the surface (90°).
  2. sin θc = n₂ ÷ n₁ = 1.00 ÷ 1.33 = 0.752.
  3. θc = sin⁻¹ 0.752 = 48.8°.
Full working
  1. sin θc = n₂ ÷ n₁
  2. sin θc = 1.00 ÷ 1.33 = 0.752
  3. θc = 48.8°
c
Merit

The light from the diver's torch speeds up as it crosses from the water (n = 1.33) into the air.

Use n = c ÷ v and c = 3.00 × 10⁸ m s⁻¹.

Calculate the speed of light in the water, and explain why the ray bends away from the normal as it enters the air. Say what happens to the frequency and wavelength of the light.

Hint

Think of a wavefront meeting the surface at an angle: one end reaches the air first and speeds up first.

Answer

v = c ÷ n = 3.00 × 10⁸ ÷ 1.33 = 2.26 × 10⁸ m s⁻¹. A wavefront meets the surface at an angle, so one end reaches the air first and speeds up while the rest is still in the slower water. That end travels further in the same time, so the wavefront swings round and the ray bends away from the normal. The frequency stays the same (it is set by the source); since v = fλ and v increases, the wavelength gets longer.

Step by step
  1. n = c ÷ v, so v = c ÷ n = 3.00 × 10⁸ ÷ 1.33 = 2.26 × 10⁸ m s⁻¹.
  2. The wavefronts reach the surface at an angle, so one end of each wavefront crosses into the air before the other.
  3. That end speeds up first and covers more distance in the same time, so the wavefront turns.
  4. The direction of travel is at right angles to the wavefront, so the ray bends away from the normal.
  5. The frequency does not change at a boundary. With v = fλ, a higher speed at the same frequency means a longer wavelength.
Full working
  1. v = c ÷ n
  2. v = 3.00 × 10⁸ ÷ 1.33 = 2.26 × 10⁸ m s⁻¹in water
  3. one side of the wavefront speeds up firstwavefront turns
  4. f unchanged, λ = v ÷ f increasesin air
  5. speed 2.26 × 10⁸ m s⁻¹; bends away from the normal
d
Excellence

The diver hangs 3.0 m below the calm surface of Lake Taupō (n = 1.33) and looks up. Directly above, the diver sees the sky through a bright circle in the surface. Outside the circle the surface looks like a mirror, showing the lake bed.

Use the critical angle from part (b).

Explain why the diver sees the sky only inside a circle and the lake bed outside it, and calculate the radius of the circle.

Hint

Light from the sky that just skims the surface enters the water at the critical angle. Draw the right-angled triangle from the diver's eye to the edge of the circle.

Answer

Light from anywhere in the sky refracts towards the normal as it enters the water, so even light skimming along the surface (90° in air) enters at only 48.8° to the normal. All the sky's light reaches the diver within 48.8° of straight up: a cone that meets the surface in a circle. Looking at more than 48.8° from the vertical, light coming up from the lake bed meets the surface at more than the critical angle, so it is totally internally reflected: the surface acts as a mirror and shows the lake bed. Radius r = 3.0 × tan 48.8° = 3.4 m.

Step by step
  1. Light from the sky bends towards the normal as it enters the water (air to water, n increases).
  2. The largest possible angle in air is 90° (light skimming the surface). In the water it refracts at the critical angle, 48.8°.
  3. So all light from the sky arrives within 48.8° of the vertical: the diver sees the sky in a cone, which meets the surface in a circle.
  4. Outside that cone, light from the lake bed hits the surface at more than 48.8°, more than the critical angle, so it is totally internally reflected back down. The surface looks like a mirror.
  5. The edge of the circle: tan 48.8° = r ÷ 3.0, so r = 3.0 × tan 48.8° = 3.0 × 1.14 = 3.4 m.
Full working
  1. sky light skimming the surface enters at θc = 48.8°
  2. sky seen only within 48.8° of verticala cone
  3. beyond 48.8°: angle > θctotal internal reflection
  4. tan 48.8° = r ÷ 3.0
  5. r = 3.0 × 1.14 = 3.4 m
Question Two

Question Two

a
Achieved

A student in a Year 12 lab in Hamilton places a candle 30 cm from a converging lens of focal length 12 cm.

Use 1f = 1do + 1di.

Calculate how far from the lens the image forms.

Hint

Rearrange to 1di = 1f − 1do, then take the reciprocal.

Answer

1di = 112 − 130 = 0.0500, so di = 20 cm on the far side of the lens (a real image).

Step by step
  1. f = 12 cm and do = 30 cm.
  2. 1di = 1f − 1do = 112 − 130 = 0.0833 − 0.0333 = 0.0500.
  3. di = 1 ÷ 0.0500 = 20 cm. It is positive, so the image is real, on the other side of the lens.
Full working
  1. 1di = 1f − 1do
  2. 1di = 112 − 130 = 0.0500
  3. di = 20 cm
b
Achieved

The candle flame in part (a) is 4.5 cm tall. The lens forms its image 20 cm from the lens, with the flame 30 cm from the lens.

Use m = di ÷ do = hi ÷ ho.

Calculate the height of the image and describe the image.

Hint

Find m first, then hi = m × ho. A real image from one lens is always upside down.

Answer

m = 20 ÷ 30 = 0.67, so hi = 0.67 × 4.5 = 3.0 cm. The image is real, inverted and smaller than the flame.

Step by step
  1. m = di ÷ do = 20 ÷ 30 = 0.667.
  2. hi = m × ho = 0.667 × 4.5 = 3.0 cm.
  3. The image forms where the rays really meet, so it is real; a real image from a converging lens is inverted; m is less than 1, so it is diminished.
Full working
  1. m = di ÷ do = 20 ÷ 30 = 0.667
  2. hi = 0.667 × 4.5 = 3.0 cm
  3. real, inverted, diminished, 3.0 cm tall
c
Merit

The student now uses the same lens (f = 12 cm) as a magnifying glass, holding it 8.0 cm above a stamp.

Use 1f = 1do + 1di and m = di ÷ do.

Calculate the image distance and magnification, and explain why the image is virtual and upright.

Hint

The object is inside the focal length, so expect a negative image distance.

Answer

1di = 112 − 18.0 = −0.0417, so di = −24 cm: the image is 24 cm from the lens on the same side as the stamp. m = 24 ÷ 8.0 = 3.0, so it is 3 times larger. The stamp is inside the focal length, so the rays leaving the lens still spread out and never meet. The eye traces them back to where they seem to come from, behind the stamp. No light actually reaches that point, so the image is virtual, and it is the right way up.

Step by step
  1. 1di = 1f − 1do = 112 − 18.0 = 0.0833 − 0.125 = −0.0417.
  2. di = −24 cm. The negative sign means the image is on the same side as the object.
  3. m = 24 ÷ 8.0 = 3.0: three times larger.
  4. The object is closer than the focal point, so the lens cannot bring the rays together; they leave the lens diverging.
  5. Traced backwards, the rays seem to come from a point 24 cm behind the lens. Light does not really meet there, so the image is virtual and upright.
Full working
  1. 1di = 112 − 18.0 = −0.0417
  2. di = −24 cmsame side as the stamp
  3. m = 24 ÷ 8.0 = 3.0
  4. rays diverge after the lenstraced back
  5. virtual, upright, 3.0 times larger, 24 cm from the lens
d
Excellence

A school projector has a converging lens of focal length 15 cm. It projects a slide 2.4 cm tall onto a screen 3.00 m from the lens.

Use 1f = 1do + 1di and m = di ÷ do = hi ÷ ho.

Calculate how far the slide is from the lens and the height of the picture on the screen. The screen is then moved back to 4.00 m from the lens. Explain how, and how far, the slide must move to keep the picture sharp, and what happens to the size of the picture.

Hint

Work in centimetres: di = 300 cm, then 400 cm. Find do each time and compare.

Answer

At 3.00 m: 1do = 115 − 1300, so do = 15.8 cm; m = 300 ÷ 15.8 = 19, so the picture is 19 × 2.4 = 46 cm tall. At 4.00 m: 1do = 115 − 1400, so do = 15.6 cm; the slide must move about 0.2 cm (2 mm) closer to the lens. m = 400 ÷ 15.6 = 25.7, so the picture grows to about 62 cm. A larger image distance needs the object closer to the focal point, and the larger ratio di ÷ do makes the picture bigger.

Step by step
  1. Screen at 300 cm: 1do = 1f − 1di = 115 − 1300 = 0.0633, so do = 15.8 cm.
  2. m = di ÷ do = 300 ÷ 15.8 = 19.0, so hi = 19.0 × 2.4 = 45.6 cm, about 46 cm.
  3. Screen at 400 cm: 1do = 115 − 1400 = 0.0642, so do = 15.6 cm.
  4. The slide moves from 15.8 cm to 15.6 cm: about 0.2 cm (2 mm) closer to the lens, towards the focal point.
  5. m = 400 ÷ 15.6 = 25.7, so hi = 25.7 × 2.4 = 61.6 cm, about 62 cm.
  6. The further the image, the closer the object must be to the focal point, and the bigger the magnification.
Full working
  1. 1do = 115 − 1300do = 15.8 cm
  2. m = 300 ÷ 15.8 = 19.0hi = 46 cm
  3. 1do = 115 − 1400do = 15.6 cm
  4. slide moves 0.2 cm closer to the lens
  5. m = 25.7picture about 62 cm tall
Question Three

Question Three

a
Achieved

Waves roll into Wellington Harbour. A buoy bobs up and down 12 times in 30 s, and the crests are 6.0 m apart.

Use f = 1T and v = fλ.

Calculate the frequency and the speed of the waves.

Hint

Frequency is the number of waves per second. The distance between crests is the wavelength.

Answer

f = 12 ÷ 30 = 0.40 Hz (T = 2.5 s). v = fλ = 0.40 × 6.0 = 2.4 m s⁻¹.

Step by step
  1. 12 oscillations in 30 s: f = 12 ÷ 30 = 0.40 Hz, and T = 1 ÷ f = 2.5 s.
  2. The crests are 6.0 m apart, so λ = 6.0 m.
  3. v = fλ = 0.40 × 6.0 = 2.4 m s⁻¹.
Full working
  1. f = 12 ÷ 30 = 0.40 Hz
  2. λ = 6.0 m
  3. v = fλ = 0.40 × 6.0 = 2.4 m s⁻¹
b
Achieved

On a foggy night at the harbour entrance, a lighthouse flashes light and a foghorn sounds.

Compare the light waves and the sound waves: the type of each wave, how it travels, and its speed.

Hint

One is electromagnetic and one is mechanical. Which one could cross empty space?

Answer

Light is an electromagnetic wave: it does not need a medium and can travel through a vacuum; it is transverse, and travels at 3.00 × 10⁸ m s⁻¹ in a vacuum (about the same in air). Sound is a mechanical wave: it needs a medium (the air particles pass the vibration on); it is longitudinal, and travels at about 340 m s⁻¹ in air, far slower than light.

Step by step
  1. Light is electromagnetic: oscillating electric and magnetic fields, so it needs no medium and can cross a vacuum.
  2. Light is transverse and travels at 3.00 × 10⁸ m s⁻¹.
  3. Sound is mechanical: particles of the air vibrate and pass the energy on, so it needs a medium and cannot cross a vacuum.
  4. Sound in air is longitudinal and travels at about 340 m s⁻¹.
Full working
  1. light: electromagnetic, no medium needed, transverse, 3.00 × 10⁸ m s⁻¹
  2. sound: mechanical, needs a medium, longitudinal, about 340 m s⁻¹
c
Merit

Waves with a wavelength of 6.0 m pass through a 5.0 m gap in a breakwater and spread out into the marina behind it.

Explain why the waves spread out, and how the spreading would change if the waves had a wavelength of 1.0 m. State what happens to the speed, frequency and wavelength as the waves pass through the gap.

Hint

Diffraction is greatest when the gap is about the same size as the wavelength, or smaller.

Answer

The spreading is diffraction: each point of the wavefront in the gap acts as a source, so the wave spreads into the area behind the breakwater. The amount of diffraction depends on the gap compared with the wavelength. Here the gap (5.0 m) is smaller than the wavelength (6.0 m), so the waves spread out a lot, almost as semicircles. With 1.0 m waves the gap is five wavelengths wide, so they would spread much less and mostly carry straight on. The water depth is the same either side, so the speed is unchanged; the frequency is set by the source, so it is unchanged; so the wavelength (λ = v ÷ f) is unchanged too.

Step by step
  1. The bending of waves through a gap is diffraction.
  2. How much they spread depends on the gap width compared with the wavelength: gap about λ or smaller gives strong spreading.
  3. 5.0 m gap with 6.0 m waves: the gap is smaller than λ, so the waves spread out strongly into the marina.
  4. 1.0 m waves: the gap is 5 wavelengths wide, so the waves spread much less; most of the wave carries straight on.
  5. Diffraction does not change the medium or the source, so speed, frequency and wavelength stay the same.
Full working
  1. diffraction through a gap
  2. spreading depends on gap ÷ λ
  3. 5.0 m gap ÷ 6.0 m λ < 1strong spreading
  4. 1.0 m λ: gap = 5λlittle spreading
  5. v, f and λ unchanged
d
Excellence

At an outdoor event on the waterfront, two speakers side by side play the same 680 Hz note, in phase. The speed of sound is 340 m s⁻¹.

A listener stands 12.00 m from one speaker and 13.25 m from the other.

Use v = fλ.

Explain, with calculations, whether the listener hears a loud or a quiet sound. The note is then changed to 816 Hz. Explain what the listener now hears.

Hint

Find the wavelength, then the path difference in wavelengths. Whole numbers mean constructive interference; halves mean destructive.

Answer

λ = 340 ÷ 680 = 0.50 m. Path difference = 13.25 − 12.00 = 1.25 m = 2.5λ. Waves from the two speakers arrive half a cycle out of step: a compression from one meets a rarefaction from the other, so they cancel (destructive interference). The listener is on a nodal line and hears a quiet sound. At 816 Hz, λ = 340 ÷ 816 = 0.417 m and 1.25 m = 3.0λ, a whole number of wavelengths, so the waves arrive in phase and add (constructive interference): the listener is now on an antinodal line and hears a loud sound.

Step by step
  1. λ = v ÷ f = 340 ÷ 680 = 0.50 m.
  2. Path difference = 13.25 − 12.00 = 1.25 m.
  3. 1.25 ÷ 0.50 = 2.5 wavelengths: a half-number, so the waves arrive half a cycle out of phase.
  4. Compressions meet rarefactions and cancel: destructive interference, a nodal line, a quiet spot.
  5. At 816 Hz: λ = 340 ÷ 816 = 0.417 m, and 1.25 ÷ 0.417 = 3.0 wavelengths.
  6. A whole number of wavelengths: the waves arrive in phase and add, constructive interference, a loud sound.
Full working
  1. λ = 340 ÷ 680 = 0.50 m
  2. path difference = 1.25 m = 2.5λdestructive, quiet
  3. λ = 340 ÷ 816 = 0.417 m
  4. 1.25 m = 3.0λconstructive, loud

All NCEA Level 2 Science

A Vertex Academy practice paper, written from NZQA's 2026 assessment specification for AS 91170. It is not an NZQA paper. Grades use the 2025 exam's cut scores: 7, 13 and 19 out of 24 for Achieved, Merit and Excellence.