Level 3 Chemistry aqueous equilibrium practice paper 2026
Question One
Magnesium hydroxide, Mg(OH)₂, is the active ingredient in some antacids. Ks(Mg(OH)₂) = 5.61 × 10⁻¹² at 25 °C.
Write the equation for the equilibrium in a saturated solution of Mg(OH)₂, and the expression for Ks.
Hint
The solid is left out of the Ks expression.
Answer
Mg(OH)₂(s) ⇌ Mg²⁺(aq) + 2OH⁻(aq). Ks = [Mg²⁺][OH⁻]².
Step by step
- In a saturated solution, solid Mg(OH)₂ is in equilibrium with its ions.
- Each Mg(OH)₂ gives one Mg²⁺ and two OH⁻.
- Ks is the product of the ion concentrations, each raised to the power of its coefficient: [Mg²⁺][OH⁻]².
Full working
- Mg(OH)₂(s) ⇌ Mg²⁺(aq) + 2OH⁻(aq)
- Ks = [Mg²⁺][OH⁻]²
Calculate the solubility, s, of Mg(OH)₂ in pure water at 25 °C, in mol L⁻¹.
Hint
If s mol L⁻¹ dissolves, [Mg²⁺] = s and [OH⁻] = 2s.
Answer
Ks = s × (2s)² = 4s³. s = ∛(5.61 × 10⁻¹² ÷ 4) = ∛(1.40 × 10⁻¹²) = 1.12 × 10⁻⁴ mol L⁻¹.
Step by step
- Let the solubility be s mol L⁻¹. Then [Mg²⁺] = s and [OH⁻] = 2s.
- Ks = s × (2s)² = 4s³ = 5.61 × 10⁻¹².
- s³ = 5.61 × 10⁻¹² ÷ 4 = 1.4025 × 10⁻¹².
- s = cube root of 1.4025 × 10⁻¹² = 1.12 × 10⁻⁴ mol L⁻¹.
Full working
- Ks = s(2s)² = 4s³
- s³ = 5.61 × 10⁻¹² ÷ 4 = 1.40 × 10⁻¹²
- s = 1.12 × 10⁻⁴ mol L⁻¹
Calculate the solubility of Mg(OH)₂ in 0.0500 mol L⁻¹ sodium hydroxide solution, and explain why it is different from its solubility in water.
Hint
The OH⁻ from the NaOH is far greater than the OH⁻ from the dissolved Mg(OH)₂, so take [OH⁻] = 0.0500 mol L⁻¹.
Answer
[OH⁻] = 0.0500 mol L⁻¹ (the Mg(OH)₂ adds very little). s = [Mg²⁺] = Ks ÷ [OH⁻]² = 5.61 × 10⁻¹² ÷ 0.0500² = 2.24 × 10⁻⁹ mol L⁻¹. This is far lower than in water (1.12 × 10⁻⁴ mol L⁻¹). OH⁻ is a common ion: the extra OH⁻ from NaOH shifts the equilibrium Mg(OH)₂(s) ⇌ Mg²⁺ + 2OH⁻ to the left, so less Mg(OH)₂ dissolves.
Step by step
- NaOH supplies 0.0500 mol L⁻¹ of OH⁻, far more than Mg(OH)₂ adds, so [OH⁻] ≈ 0.0500 mol L⁻¹.
- s = [Mg²⁺] = Ks ÷ [OH⁻]² = 5.61 × 10⁻¹² ÷ 0.00250 = 2.24 × 10⁻⁹ mol L⁻¹.
- The added OH⁻ is a common ion. Adding a product pushes the equilibrium to the left.
- So less Mg(OH)₂ can dissolve: about 50 000 times less than in pure water.
Full working
- [OH⁻] = 0.0500 mol L⁻¹
- s = 5.61 × 10⁻¹² ÷ 0.0500²
- s = 2.24 × 10⁻⁹ mol L⁻¹common ion shifts equilibrium left
20.0 mL of 0.00100 mol L⁻¹ MgCl₂ solution is mixed with 30.0 mL of 0.000200 mol L⁻¹ NaOH solution.
Show whether a precipitate of Mg(OH)₂ forms. Then discuss why solid Mg(OH)₂ dissolves when hydrochloric acid is added.
Hint
Mixing dilutes both solutions into 50.0 mL. Compare the ionic product, Q, with Ks.
Answer
After mixing, the total volume is 50.0 mL. [Mg²⁺] = 0.00100 × 20.0 ÷ 50.0 = 4.00 × 10⁻⁴ mol L⁻¹ and [OH⁻] = 0.000200 × 30.0 ÷ 50.0 = 1.20 × 10⁻⁴ mol L⁻¹. Q = [Mg²⁺][OH⁻]² = 4.00 × 10⁻⁴ × (1.20 × 10⁻⁴)² = 5.76 × 10⁻¹². Q is greater than Ks (5.61 × 10⁻¹²), so a precipitate of Mg(OH)₂ forms (only just). When hydrochloric acid is added, H₃O⁺ ions react with OH⁻ ions: H₃O⁺ + OH⁻ → 2H₂O. This lowers [OH⁻], so Q falls below Ks, and the equilibrium Mg(OH)₂(s) ⇌ Mg²⁺(aq) + 2OH⁻(aq) shifts to the right to replace the OH⁻. More solid dissolves, and with enough acid it all dissolves. This is how an Mg(OH)₂ antacid neutralises stomach acid.
Step by step
- Mixing gives 50.0 mL in total, so each concentration is diluted.
- [Mg²⁺] = 0.00100 × 20.0 ÷ 50.0 = 4.00 × 10⁻⁴ mol L⁻¹.
- [OH⁻] = 0.000200 × 30.0 ÷ 50.0 = 1.20 × 10⁻⁴ mol L⁻¹.
- Q = 4.00 × 10⁻⁴ × (1.20 × 10⁻⁴)² = 5.76 × 10⁻¹², which is greater than Ks = 5.61 × 10⁻¹², so a precipitate forms.
- Added acid removes OH⁻: H₃O⁺ + OH⁻ → 2H₂O.
- With less OH⁻, Q < Ks, so the equilibrium shifts right and more Mg(OH)₂ dissolves until it has all gone.
Full working
- [Mg²⁺] = 0.00100 × 20.0 ÷ 50.0 = 4.00 × 10⁻⁴
- [OH⁻] = 0.000200 × 30.0 ÷ 50.0 = 1.20 × 10⁻⁴
- Q = 4.00 × 10⁻⁴ × (1.20 × 10⁻⁴)² = 5.76 × 10⁻¹² > Ksprecipitate forms
- H₃O⁺ + OH⁻ → 2H₂O[OH⁻] falls, Q < Ks
- equilibrium shifts rightMg(OH)₂ dissolves
Question Two
Ethanoic acid, CH₃COOH, is a weak acid: Ka = 1.74 × 10⁻⁵.
Write the expression for Ka, and list the species present in a 0.100 mol L⁻¹ solution of ethanoic acid (other than water) in order of decreasing concentration.
Hint
Ethanoic acid only partly reacts with water. Where does OH⁻ come from?
Answer
Ka = [CH₃COO⁻][H₃O⁺] ÷ [CH₃COOH]. Order: CH₃COOH > CH₃COO⁻ = H₃O⁺ > OH⁻.
Step by step
- CH₃COOH + H₂O ⇌ CH₃COO⁻ + H₃O⁺, so Ka = [CH₃COO⁻][H₃O⁺] ÷ [CH₃COOH].
- Ethanoic acid is weak, so most of it stays as CH₃COOH molecules.
- Each molecule that reacts makes one CH₃COO⁻ and one H₃O⁺, so these two are equal.
- The solution is acidic, so OH⁻ (from water) is present in only a tiny amount.
Full working
- Ka = [CH₃COO⁻][H₃O⁺] ÷ [CH₃COOH]
- CH₃COOH > CH₃COO⁻ = H₃O⁺ > OH⁻
Calculate the pH of 0.100 mol L⁻¹ ethanoic acid.
Hint
For a weak acid, [H₃O⁺] = √(Ka × c).
Answer
[H₃O⁺] = √(1.74 × 10⁻⁵ × 0.100) = 1.32 × 10⁻³ mol L⁻¹, so pH = −log(1.32 × 10⁻³) = 2.88.
Step by step
- Assume only a small fraction reacts, so [CH₃COOH] ≈ 0.100 and [CH₃COO⁻] = [H₃O⁺].
- Ka = [H₃O⁺]² ÷ 0.100, so [H₃O⁺] = √(1.74 × 10⁻⁵ × 0.100) = √(1.74 × 10⁻⁶) = 1.32 × 10⁻³ mol L⁻¹.
- pH = −log(1.32 × 10⁻³) = 2.88.
Full working
- [H₃O⁺] = √(1.74 × 10⁻⁵ × 0.100)
- [H₃O⁺] = 1.32 × 10⁻³ mol L⁻¹
- pH = 2.88
Calculate the pH of 0.0500 mol L⁻¹ sodium ethanoate, CH₃COONa, solution, and explain why the solution is basic. Kw = 1.00 × 10⁻¹⁴.
Hint
The ethanoate ion is the conjugate base of ethanoic acid. Kb = Kw ÷ Ka.
Answer
CH₃COO⁻ + H₂O ⇌ CH₃COOH + OH⁻. Kb = 1.00 × 10⁻¹⁴ ÷ 1.74 × 10⁻⁵ = 5.75 × 10⁻¹⁰. [OH⁻] = √(5.75 × 10⁻¹⁰ × 0.0500) = 5.36 × 10⁻⁶ mol L⁻¹. pOH = 5.27, so pH = 14 − 5.27 = 8.73. The solution is basic because the ethanoate ion, the conjugate base of a weak acid, accepts protons from water and produces OH⁻ ions (Na⁺ does not react with water).
Step by step
- Sodium ethanoate dissolves completely to Na⁺ and CH₃COO⁻. Na⁺ does not react with water.
- CH₃COO⁻ is a weak base: CH₃COO⁻ + H₂O ⇌ CH₃COOH + OH⁻.
- Kb = Kw ÷ Ka = 1.00 × 10⁻¹⁴ ÷ 1.74 × 10⁻⁵ = 5.75 × 10⁻¹⁰.
- [OH⁻] = √(Kb × c) = √(5.75 × 10⁻¹⁰ × 0.0500) = 5.36 × 10⁻⁶ mol L⁻¹.
- pOH = −log(5.36 × 10⁻⁶) = 5.27, so pH = 14.00 − 5.27 = 8.73, which is above 7: basic.
Full working
- CH₃COO⁻ + H₂O ⇌ CH₃COOH + OH⁻
- Kb = 1.00 × 10⁻¹⁴ ÷ 1.74 × 10⁻⁵ = 5.75 × 10⁻¹⁰
- [OH⁻] = √(5.75 × 10⁻¹⁰ × 0.0500) = 5.36 × 10⁻⁶
- pOH = 5.27pH = 8.73
A buffer solution contains 0.100 mol L⁻¹ ethanoic acid and 0.0800 mol L⁻¹ sodium ethanoate.
Calculate the pH of the buffer, and discuss how it keeps its pH nearly constant when a small amount of acid or of base is added.
Hint
pH = pKa + log([A⁻] ÷ [HA]). Then write an equation for each addition.
Answer
pKa = −log(1.74 × 10⁻⁵) = 4.76. pH = 4.76 + log(0.0800 ÷ 0.100) = 4.76 − 0.097 = 4.66. The buffer contains large amounts of both a weak acid (CH₃COOH) and its conjugate base (CH₃COO⁻). If a small amount of acid is added, the ethanoate ions react with the added H₃O⁺: CH₃COO⁻ + H₃O⁺ → CH₃COOH + H₂O. If a small amount of base is added, the ethanoic acid reacts with the added OH⁻: CH₃COOH + OH⁻ → CH₃COO⁻ + H₂O. Either way, the added ions are used up, and the ratio [CH₃COO⁻] ÷ [CH₃COOH] changes only slightly, because both are present in much larger amounts than what was added. Since the pH depends on that ratio, it changes very little.
Step by step
- pKa = −log Ka = −log(1.74 × 10⁻⁵) = 4.76.
- pH = pKa + log([CH₃COO⁻] ÷ [CH₃COOH]) = 4.76 + log(0.0800 ÷ 0.100) = 4.76 − 0.097 = 4.66.
- Added acid is removed by the conjugate base: CH₃COO⁻ + H₃O⁺ → CH₃COOH + H₂O.
- Added base is removed by the weak acid: CH₃COOH + OH⁻ → CH₃COO⁻ + H₂O.
- Both buffer components are present in large amounts, so a small addition changes their ratio only slightly, and the pH barely changes.
Full working
- pKa = 4.76
- pH = 4.76 + log(0.0800 ÷ 0.100) = 4.66
- acid added: CH₃COO⁻ + H₃O⁺ → CH₃COOH + H₂O
- base added: CH₃COOH + OH⁻ → CH₃COO⁻ + H₂O
- ratio changes littlepH nearly constant
Question Three
20.0 mL of 0.120 mol L⁻¹ ammonia, NH₃, is titrated with 0.100 mol L⁻¹ hydrochloric acid. pKa(NH₄⁺) = 9.24.
Calculate the volume of HCl needed to reach the equivalence point, and state the pH when half that volume has been added.
Hint
NH₃ and HCl react 1 : 1. At half-equivalence, [NH₃] = [NH₄⁺].
Answer
n(NH₃) = 0.120 × 0.0200 = 0.00240 mol, so V(HCl) = 0.00240 ÷ 0.100 = 0.0240 L = 24.0 mL. At half-equivalence (12.0 mL), [NH₃] = [NH₄⁺], so pH = pKa = 9.24.
Step by step
- NH₃ + HCl → NH₄⁺ + Cl⁻, a 1 : 1 reaction.
- n(NH₃) = c × V = 0.120 × 0.0200 = 0.00240 mol, so 0.00240 mol of HCl is needed.
- V(HCl) = n ÷ c = 0.00240 ÷ 0.100 = 0.0240 L = 24.0 mL.
- At 12.0 mL half the NH₃ has become NH₄⁺, so the two are equal and pH = pKa = 9.24.
Full working
- n(NH₃) = 0.120 × 0.0200 = 0.00240 mol
- V(HCl) = 0.00240 ÷ 0.100 = 24.0 mL
- half-equivalence: pH = pKa = 9.24
Choose the best indicator from the table for this titration, and give a reason.
| Indicator | pH range of colour change |
|---|---|
| phenolphthalein | 8.3 to 10.0 |
| bromothymol blue | 6.0 to 7.6 |
| methyl red | 4.4 to 6.2 |
Hint
The pH at the equivalence point of a weak base titrated with a strong acid is below 7.
Answer
Methyl red. At the equivalence point the solution contains NH₄⁺ ions, a weak acid, so the pH is below 7 (about 5.3). Methyl red changes colour between pH 4.4 and 6.2, which includes the equivalence-point pH and lies on the steep part of the curve.
Step by step
- The equivalence point of weak base plus strong acid is acidic, because NH₄⁺ is a weak acid.
- The pH there is about 5.3 (see part c).
- An indicator must change colour on the steep part of the curve, at the equivalence-point pH.
- Only methyl red's range (4.4 to 6.2) includes this pH.
Full working
- equivalence pH below 7 (about 5.3)NH₄⁺ is a weak acid
- methyl red: 4.4 to 6.2includes the equivalence pH
Calculate the pH at the equivalence point, and explain why it is below 7.
Hint
At equivalence, all the NH₃ has become NH₄⁺ in a total volume of 44.0 mL. NH₄⁺ is a weak acid.
Answer
At equivalence, n(NH₄⁺) = 0.00240 mol in 20.0 + 24.0 = 44.0 mL, so [NH₄⁺] = 0.00240 ÷ 0.0440 = 0.0545 mol L⁻¹. Ka = 10⁻⁹·²⁴ = 5.75 × 10⁻¹⁰. [H₃O⁺] = √(5.75 × 10⁻¹⁰ × 0.0545) = 5.60 × 10⁻⁶ mol L⁻¹, so pH = 5.25. The pH is below 7 because NH₄⁺ is a weak acid: NH₄⁺ + H₂O ⇌ NH₃ + H₃O⁺ produces H₃O⁺ ions, while Cl⁻ does not react with water.
Step by step
- At equivalence all 0.00240 mol of NH₃ has become NH₄⁺.
- Total volume = 20.0 + 24.0 = 44.0 mL, so [NH₄⁺] = 0.00240 ÷ 0.0440 = 0.0545 mol L⁻¹.
- Ka = 10⁻⁹·²⁴ = 5.75 × 10⁻¹⁰.
- [H₃O⁺] = √(Ka × c) = √(5.75 × 10⁻¹⁰ × 0.0545) = 5.60 × 10⁻⁶ mol L⁻¹, so pH = 5.25.
- NH₄⁺ + H₂O ⇌ NH₃ + H₃O⁺: the ammonium ion is a weak acid, so the solution is acidic.
Full working
- [NH₄⁺] = 0.00240 ÷ 0.0440 = 0.0545 mol L⁻¹
- Ka = 10⁻⁹·²⁴ = 5.75 × 10⁻¹⁰
- [H₃O⁺] = √(5.75 × 10⁻¹⁰ × 0.0545) = 5.60 × 10⁻⁶
- pH = 5.25NH₄⁺ + H₂O ⇌ NH₃ + H₃O⁺
Calculate the pH after (i) 6.00 mL and (ii) 30.0 mL of HCl have been added. Then discuss how the main species in the flask change through the titration.
Hint
At 6.00 mL there is still NH₃ left with some NH₄⁺: a buffer. At 30.0 mL the HCl is in excess.
Answer
(i) n(HCl) = 0.100 × 0.00600 = 0.000600 mol. This turns 0.000600 mol of NH₃ into NH₄⁺, leaving 0.00240 − 0.000600 = 0.00180 mol NH₃. pH = pKa + log(n(NH₃) ÷ n(NH₄⁺)) = 9.24 + log(0.00180 ÷ 0.000600) = 9.24 + 0.48 = 9.72. (ii) n(HCl) = 0.00300 mol, so the excess is 0.00300 − 0.00240 = 0.000600 mol in 50.0 mL: [H₃O⁺] = 0.0120 mol L⁻¹ and pH = 1.92. At the start the flask holds NH₃ with a little NH₄⁺ and OH⁻ (pH about 11). As acid is added, NH₃ is converted into NH₄⁺, so the flask holds a buffer of NH₃ and NH₄⁺ and the pH falls slowly, passing pKa (9.24) at half-equivalence. At equivalence the main species are NH₄⁺ and Cl⁻ (pH 5.25). After equivalence there is excess H₃O⁺ from the strong acid, so the pH falls steeply and then levels off near 2.
Step by step
- (i) n(HCl) = 0.000600 mol reacts with the same amount of NH₃, forming 0.000600 mol NH₄⁺.
- NH₃ left = 0.00240 − 0.000600 = 0.00180 mol. The NH₃ and NH₄⁺ form a buffer, and both are in the same volume.
- pH = 9.24 + log(0.00180 ÷ 0.000600) = 9.24 + 0.477 = 9.72.
- (ii) n(HCl) = 0.00300 mol, which is 0.000600 mol more than the NH₃, in 20.0 + 30.0 = 50.0 mL.
- [H₃O⁺] = 0.000600 ÷ 0.0500 = 0.0120 mol L⁻¹, so pH = 1.92.
- Species: NH₃ at the start; an NH₃ and NH₄⁺ buffer before equivalence; NH₄⁺ and Cl⁻ at equivalence; excess H₃O⁺ after it.
Full working
- (i) NH₃ left 0.00180 mol, NH₄⁺ 0.000600 molbuffer
- pH = 9.24 + log(0.00180 ÷ 0.000600) = 9.72
- (ii) excess HCl 0.000600 mol in 50.0 mL[H₃O⁺] = 0.0120
- pH = 1.92
- NH₃ → NH₃ and NH₄⁺ buffer → NH₄⁺ and Cl⁻ → excess H₃O⁺
A Vertex Academy practice paper, written from NZQA's 2026 assessment specification for AS 91392. It is not an NZQA paper. Grades use the 2025 exam's cut scores: 9, 14 and 20 out of 24 for Achieved, Merit and Excellence.