Level 3 Chemistry organic compounds practice paper 2026
Question One
Propanal and propanone both have the molecular formula C₃H₆O.
Give the condensed structural formula of each, name the functional group in each, and state what type of isomers they are.
Hint
In one, the C=O group is at the end of the chain; in the other it is in the middle.
Answer
Propanal: CH₃CH₂CHO, an aldehyde. Propanone: CH₃COCH₃, a ketone. They are constitutional (structural) isomers: same molecular formula, different structural formula.
Step by step
- Propanal has the C=O at the end of the chain, with an H on that carbon: CH₃CH₂CHO, an aldehyde.
- Propanone has the C=O on the middle carbon: CH₃COCH₃, a ketone.
- Both are C₃H₆O, but the atoms are joined differently, so they are constitutional isomers.
Full working
- propanal: CH₃CH₂CHOaldehyde
- propanone: CH₃COCH₃ketone
- same molecular formula, different structureconstitutional isomers
Each compound is warmed with Tollens' reagent.
Describe what you would observe for each, and name the organic product of any reaction.
Hint
Tollens' reagent is a mild oxidant. Which of the two can be oxidised?
Answer
Propanal: a silver mirror (or grey-black precipitate of silver) forms on the inside of the test tube, as propanal is oxidised to the propanoate ion, CH₃CH₂COO⁻ (propanoic acid). Propanone: no visible change; the solution stays colourless, because ketones are not oxidised by Tollens' reagent.
Step by step
- Tollens' reagent contains [Ag(NH₃)₂]⁺ ions, a mild oxidant.
- Aldehydes are easily oxidised to carboxylic acids (the carboxylate ion in the basic solution). The Ag⁺ is reduced to silver metal, which coats the glass.
- Ketones have no H on the C=O carbon and are not oxidised by mild oxidants, so propanone shows no change.
Full working
- propanalsilver mirror; oxidised to propanoate, CH₃CH₂COO⁻
- propanoneno change, not oxidised
Lactic acid, 2-hydroxypropanoic acid, CH₃CH(OH)COOH, forms when milk turns into yoghurt.
Explain why lactic acid exists as two optical isomers (enantiomers), and how the two isomers could be told apart.
Hint
Look at carbon 2. How many different groups are attached to it?
Answer
Carbon 2 of lactic acid is a chiral (asymmetric) carbon: it is bonded to four different groups, CH₃, H, OH and COOH. The four groups can be arranged around it in two ways that are mirror images of each other and cannot be superimposed, like a left and a right hand. These are the two enantiomers. They have the same physical and chemical properties except for their effect on plane-polarised light: one rotates the plane of polarisation clockwise and the other rotates it by the same angle anticlockwise. A polarimeter can tell them apart.
Step by step
- Carbon 2 is bonded to CH₃, H, OH and COOH: four different groups, so it is a chiral carbon.
- The groups can be arranged in two ways that are non-superimposable mirror images: two enantiomers.
- Enantiomers have identical melting points, boiling points and most reactions.
- They rotate plane-polarised light by equal amounts in opposite directions, so they can be told apart with a polarimeter.
Full working
- C2 bonded to CH₃, H, OH, COOHchiral carbon
- non-superimposable mirror imagestwo enantiomers
- rotate plane-polarised light in opposite directionspolarimeter
Lactic acid, CH₃CH(OH)COOH, is heated separately with:
(i) ethanol and a few drops of concentrated sulfuric acid
(ii) acidified potassium dichromate.
Discuss both reactions: name the type of each reaction and the organic product, and explain whether each product is optically active (starting from one enantiomer of lactic acid).
Hint
Lactic acid has two functional groups. Which one reacts in each case? Then check carbon 2 of each product for four different groups.
Answer
(i) The COOH group reacts with ethanol in a condensation (esterification) reaction, catalysed by the acid, to form the ester ethyl 2-hydroxypropanoate, CH₃CH(OH)COOCH₂CH₃, and water. Carbon 2 is still bonded to four different groups (CH₃, H, OH and COOCH₂CH₃), so it is still chiral, and the product is optically active. (ii) The OH group on carbon 2 is a secondary alcohol, so acidified dichromate oxidises it to a ketone (oxidation): the product is 2-oxopropanoic acid, CH₃COCOOH, and the solution changes from orange to green. Carbon 2 is now a C=O carbon bonded to only three groups, so it is no longer chiral, and the product has no optical isomers: it is not optically active.
Step by step
- (i) Carboxylic acid + alcohol with concentrated H₂SO₄: esterification, a condensation reaction that also forms water.
- Product: ethyl 2-hydroxypropanoate, CH₃CH(OH)COOCH₂CH₃.
- Carbon 2 still carries CH₃, H, OH and the ester group, four different groups, so the ester is optically active.
- (ii) The secondary alcohol is oxidised to a ketone: 2-oxopropanoic acid, CH₃COCOOH. The dichromate turns from orange to green.
- Carbon 2 is now part of a C=O group, with only three groups attached, so it is not chiral and the product is not optically active.
Full working
- (i) esterification (condensation)CH₃CH(OH)COOCH₂CH₃, ethyl 2-hydroxypropanoate
- C2 still has four different groupsoptically active
- (ii) oxidation of secondary alcoholCH₃COCOOH, 2-oxopropanoic acid; orange to green
- C2 now C=Onot chiral, not optically active
Question Two
1-bromopropane, CH₃CH₂CH₂Br, is warmed separately with (i) aqueous potassium hydroxide and (ii) concentrated ammonia in ethanol.
Name the organic product of each reaction and the type of reaction.
Hint
In both reactions the Br atom is replaced by another group.
Answer
(i) Propan-1-ol, CH₃CH₂CH₂OH: substitution. (ii) Propan-1-amine (1-aminopropane), CH₃CH₂CH₂NH₂: substitution.
Step by step
- (i) OH⁻ from aqueous KOH replaces the Br atom, giving propan-1-ol.
- (ii) NH₃ replaces the Br atom (and HBr is removed), giving propan-1-amine.
- In both, one atom or group replaces another, so both are substitution reactions.
Full working
- (i) CH₃CH₂CH₂OH, propan-1-olsubstitution
- (ii) CH₃CH₂CH₂NH₂, propan-1-aminesubstitution
Propan-1-ol is heated under reflux with acidified potassium dichromate.
Name the organic product, describe the colour change and name the type of reaction. Name the product formed if, instead, the product is distilled off as soon as it forms.
Hint
Under reflux the oxidant has time to finish the job. Distilling removes the first product before it can react further.
Answer
Under reflux: propanoic acid, CH₃CH₂COOH. The solution changes from orange to green. The reaction is oxidation. If the product is distilled off as it forms: propanal, CH₃CH₂CHO.
Step by step
- Propan-1-ol is a primary alcohol. It is oxidised first to an aldehyde, then to a carboxylic acid.
- Under reflux, the aldehyde cannot escape and is oxidised further to propanoic acid.
- Orange Cr₂O₇²⁻ is reduced to green Cr³⁺.
- Distilling removes propanal (which boils at a lower temperature) as it forms, before it is oxidised further.
Full working
- refluxpropanoic acid, CH₃CH₂COOH
- orange to greenoxidation
- distil as it formspropanal, CH₃CH₂CHO
Methyl propanoate can be made from propanoic acid in two ways:
Route 1: heat propanoic acid with methanol and a little concentrated sulfuric acid.
Route 2: react propanoic acid with thionyl chloride, SOCl₂, then add methanol to the product.
Give the structure of methyl propanoate and of the intermediate in Route 2, and explain why Route 2 gives a higher yield of ester.
Hint
Esterification from an acid is an equilibrium. What is different about the reaction of an acyl chloride?
Answer
Methyl propanoate: CH₃CH₂COOCH₃. The intermediate in Route 2 is propanoyl chloride, CH₃CH₂COCl (SO₂ and HCl are also formed). Route 1 is an equilibrium, CH₃CH₂COOH + CH₃OH ⇌ CH₃CH₂COOCH₃ + H₂O, so the reaction is incomplete and the yield is limited. In Route 2, the acyl chloride is much more reactive: it reacts quickly with methanol at room temperature, CH₃CH₂COCl + CH₃OH → CH₃CH₂COOCH₃ + HCl, and the reaction is not reversible, because HCl gas is given off. The reaction goes to completion, so the yield is higher.
Step by step
- Methyl propanoate: the propanoate part (CH₃CH₂COO) joined to the methyl group: CH₃CH₂COOCH₃.
- SOCl₂ converts the COOH group to COCl: propanoyl chloride, CH₃CH₂COCl.
- Route 1 is a reversible esterification that reaches equilibrium, so not all the acid becomes ester.
- Acyl chlorides react rapidly and completely with alcohols; the HCl produced escapes as a gas, so the reaction does not go backwards.
- So Route 2 converts nearly all the acid to ester: a higher yield.
Full working
- methyl propanoate: CH₃CH₂COOCH₃
- intermediate: propanoyl chloride, CH₃CH₂COCl
- Route 1: CH₃CH₂COOH + CH₃OH ⇌ ester + H₂Oequilibrium, incomplete
- Route 2: CH₃CH₂COCl + CH₃OH → ester + HClfast, not reversible, higher yield
Methyl propanoate is heated separately with (i) dilute hydrochloric acid and (ii) sodium hydroxide solution.
Discuss both reactions, naming the organic products, and explain why the reaction with sodium hydroxide goes to completion but the reaction with acid does not.
Hint
Both are hydrolysis. What form is the acid product in when there is excess hydroxide?
Answer
Both reactions are hydrolysis: water (with acid) or hydroxide ions break the ester link. (i) With dilute acid: CH₃CH₂COOCH₃ + H₂O ⇌ CH₃CH₂COOH + CH₃OH, giving propanoic acid and methanol. This is the reverse of esterification, and the acid only catalyses it, so it reaches an equilibrium: some ester remains. (ii) With sodium hydroxide: CH₃CH₂COOCH₃ + NaOH → CH₃CH₂COONa + CH₃OH, giving sodium propanoate (the propanoate ion) and methanol. Here the carboxylic acid formed is immediately deprotonated by the hydroxide to the propanoate ion. The propanoate ion cannot react with methanol to re-form the ester, so the reverse reaction cannot happen, and the reaction goes to completion.
Step by step
- Hydrolysis breaks the ester link, -COO-, between the acid part and the alcohol part.
- (i) Acid hydrolysis gives propanoic acid and methanol. It is the reverse of esterification and is an equilibrium, so it does not go to completion.
- (ii) Base hydrolysis gives methanol and the propanoate ion (as sodium propanoate).
- The acid formed reacts with OH⁻ straight away to form CH₃CH₂COO⁻.
- A carboxylate ion cannot form an ester with methanol, so there is no reverse reaction and all the ester is used up.
Full working
- (i) CH₃CH₂COOCH₃ + H₂O ⇌ CH₃CH₂COOH + CH₃OHequilibrium
- (ii) CH₃CH₂COOCH₃ + NaOH → CH₃CH₂COONa + CH₃OH
- acid product deprotonated to CH₃CH₂COO⁻
- carboxylate ion cannot re-form the estergoes to completion
Question Three
Name the type of polymer, and the linkage joining the monomers, in each of these: nylon-6,6; polyethylene terephthalate (PET) in drink bottles; keratin, the protein in wool.
Hint
Look for the group that joins the monomer units: -CONH- or -COO-.
Answer
Nylon-6,6: a polyamide, with amide links (-CONH-). PET: a polyester, with ester links (-COO-). Keratin: a protein, a polyamide (polypeptide) with peptide (amide) links (-CONH-).
Step by step
- Nylon-6,6 is made from a diamine and a dicarboxylic acid, joined by amide links: a polyamide.
- PET is made from a diol and a dicarboxylic acid, joined by ester links: a polyester.
- Keratin is a protein: amino acids joined by peptide links, which are amide links.
Full working
- nylon-6,6polyamide, amide link -CONH-
- PETpolyester, ester link -COO-
- keratinprotein (polypeptide), peptide (amide) link -CONH-
Two glycine molecules, H₂NCH₂COOH, join to form a dipeptide.
Give the structure of the dipeptide, name the linkage formed, and name the other product and the type of reaction.
Hint
The COOH group of one glycine reacts with the NH₂ group of the other.
Answer
H₂NCH₂CONHCH₂COOH. The linkage is a peptide (amide) link, -CONH-. The other product is water, and the reaction is condensation.
Step by step
- The COOH of one glycine and the NH₂ of the other react.
- An OH from the COOH and an H from the NH₂ are removed as water.
- The C of the first glycine bonds to the N of the second: a peptide link, -CONH-.
- Two molecules join and a small molecule (water) is lost, so this is condensation.
Full working
- H₂NCH₂COOH + H₂NCH₂COOH
- → H₂NCH₂CONHCH₂COOH + H₂O
- peptide (amide) link; condensation
A polyester (PET) shirt is splashed with concentrated sodium hydroxide solution, and soon holes appear where the splashes landed.
Explain why, naming the type of reaction and the products.
Hint
Hydroxide ions attack ester links.
Answer
The polyester chains are joined by ester links. Hydroxide ions hydrolyse the ester links (base hydrolysis), breaking the long chains into the monomers: ethane-1,2-diol, HOCH₂CH₂OH, and the salt of the dicarboxylic acid, disodium benzene-1,4-dicarboxylate (the dicarboxylate ion). Once the long chains are broken, the fibres lose their strength, and holes appear.
Step by step
- PET is a polyester: long chains held together by ester links, -COO-.
- Concentrated NaOH hydrolyses ester links: base hydrolysis.
- The products are the diol, ethane-1,2-diol, and the dicarboxylate ion, as its sodium salt.
- The strength of the fibres comes from the long chains, so breaking them destroys the fabric.
Full working
- ester links attacked by OH⁻base hydrolysis
- products: ethane-1,2-diol + sodium benzene-1,4-dicarboxylate
- chains brokenfibres weaken, holes
Part of a polymer chain is shown:
-NH-CH₂-CH₂-NH-CO-CH₂-CH₂-CO-NH-CH₂-CH₂-NH-CO-CH₂-CH₂-CO-
Discuss the two monomers it was made from, the type of polymerisation, and the organic products when the polymer is hydrolysed by (i) hot dilute hydrochloric acid and (ii) hot sodium hydroxide solution.
Hint
Break each -CO-NH- link. In acid, an amine group is protonated; in base, a carboxylic acid group is deprotonated.
Answer
The repeating unit contains amide links, -CO-NH-, so the polymer is a polyamide. Breaking each amide link and adding back H and OH gives the monomers ethane-1,2-diamine, H₂NCH₂CH₂NH₂, and butanedioic acid, HOOCCH₂CH₂COOH. It was formed by condensation polymerisation: each amide link formed with the loss of a water molecule (or HCl if the acid chloride, butanedioyl dichloride, was used). (i) Acid hydrolysis breaks the amide links to give butanedioic acid, HOOCCH₂CH₂COOH, and the diamine, which is protonated by the acid to the ethane-1,2-diammonium ion, ⁺H₃NCH₂CH₂NH₃⁺ (as its chloride salt). (ii) Base hydrolysis gives ethane-1,2-diamine, H₂NCH₂CH₂NH₂, and the butanedioate ion, ⁻OOCCH₂CH₂COO⁻ (as sodium butanedioate), because the acid groups react with the hydroxide.
Step by step
- The links -CO-NH- are amide links, so the polymer is a polyamide.
- Between the amide links are -NH-CH₂-CH₂-NH- (from a diamine) and -CO-CH₂-CH₂-CO- (from a dicarboxylic acid).
- Monomers: ethane-1,2-diamine, H₂NCH₂CH₂NH₂, and butanedioic acid, HOOCCH₂CH₂COOH.
- Each amide link formed by losing water: condensation polymerisation.
- Acid hydrolysis gives butanedioic acid and, because the acid protonates the amine groups, ⁺H₃NCH₂CH₂NH₃⁺.
- Base hydrolysis gives ethane-1,2-diamine and, because the base removes the acid H atoms, ⁻OOCCH₂CH₂COO⁻.
Full working
- amide links -CO-NH-polyamide
- monomers: H₂NCH₂CH₂NH₂ and HOOCCH₂CH₂COOH
- condensation polymerisationwater lost at each link
- (i) acid: HOOCCH₂CH₂COOH + ⁺H₃NCH₂CH₂NH₃⁺
- (ii) base: H₂NCH₂CH₂NH₂ + ⁻OOCCH₂CH₂COO⁻
A Vertex Academy practice paper, written from NZQA's 2026 assessment specification for AS 91391. It is not an NZQA paper. Grades use the 2025 exam's cut scores: 8, 14 and 19 out of 24 for Achieved, Merit and Excellence.