Vertex Learn

Level 3 Chemistry particles and thermochemistry practice paper 2026

Question One

Question One

a
Achieved

Ironsand from the west coast of the North Island is made into steel at Glenbrook, south of Auckland.

Write the electron configurations, using s, p, d notation, of: (i) Fe (ii) Fe³⁺ (iii) Br⁻.

Hint

Fe has 26 electrons. When a transition metal forms an ion, the 4s electrons are removed before the 3d electrons.

Answer

(i) Fe: 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁶ 4s². (ii) Fe³⁺: 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁵. (iii) Br⁻: 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶.

Step by step
  1. Fe has 26 electrons. After 1s² 2s² 2p⁶ 3s² 3p⁶ (18 electrons), the 4s fills (2) and then 3d takes the last 6.
  2. Fe³⁺ has lost 3 electrons: both 4s electrons go first, then one 3d electron, leaving 3d⁵.
  3. Br has 35 electrons; Br⁻ has 36, the same arrangement as krypton: the 3d holds 10 and the 4p holds 6.
Full working
  1. Fe (26 e⁻): 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁶ 4s²
  2. Fe³⁺ (23 e⁻): 4s² and one 3d removed1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁵
  3. Br⁻ (36 e⁻): 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶
b
Achieved

Name the shape of each molecule: PCl₅, SF₄ and XeF₄.

Hint

Count the regions of electron density around the central atom, then how many of them are lone pairs.

Answer

PCl₅: trigonal bipyramidal. SF₄: see-saw. XeF₄: square planar.

Step by step
  1. PCl₅: P has 5 bonding regions and no lone pairs, so the shape is trigonal bipyramidal.
  2. SF₄: S has 6 valence electrons; 4 are used in bonds and 2 form a lone pair. Five regions (one a lone pair) give a see-saw shape.
  3. XeF₄: Xe has 8 valence electrons; 4 are used in bonds and 4 form two lone pairs. Six regions (two of them lone pairs, opposite each other) give a square planar shape.
Full working
  1. PCl₅: 5 regions, 0 lone pairstrigonal bipyramidal
  2. SF₄: 5 regions, 1 lone pairsee-saw
  3. XeF₄: 6 regions, 2 lone pairssquare planar
c
Merit

Explain the general trend in first ionisation energy across Period 3, from sodium to argon, and explain why potassium has a lower first ionisation energy than sodium.

Hint

Compare the number of protons, the energy level of the outer electrons and the shielding by inner electrons.

Answer

Across Period 3, the first ionisation energy generally increases. The number of protons, and so the nuclear charge, increases by one each element, while the electrons are added to the same third energy level with similar shielding by the inner electrons. The outer electrons are therefore attracted more strongly and are closer to the nucleus, so more energy is needed to remove one. Potassium's outer electron is in the fourth energy level, further from the nucleus than sodium's (third level), and it is shielded by more inner electrons. It is held less strongly, so it is easier to remove and potassium's first ionisation energy is lower.

Step by step
  1. First ionisation energy is the energy needed to remove one mole of electrons from one mole of gaseous atoms.
  2. Across the period, protons increase from 11 to 18, so the nuclear charge increases.
  3. The outer electrons stay in the third energy level, and the shielding by inner electrons changes little.
  4. So the outer electrons are pulled more strongly (and the atoms get smaller), and more energy is needed to remove one.
  5. Potassium's outer electron is in the fourth energy level: further from the nucleus and shielded by an extra full energy level.
  6. The attraction is weaker, so less energy is needed: potassium's first ionisation energy is lower than sodium's.
Full working
  1. across Period 3: nuclear charge increases, same energy level, similar shielding
  2. stronger attraction to outer electronsionisation energy increases
  3. K: outer electron in level 4, further out, more shielding
  4. weaker attractionK lower than Na
d
Excellence

Sulfur tetrafluoride, SF₄, and xenon tetrafluoride, XeF₄, both have four fluorine atoms bonded to the central atom. Electronegativities: F 4.0, S 2.6, Xe 2.6.

Discuss the shapes and the polarities of the two molecules.

Hint

Work out the number of lone pairs on S and on Xe. Then ask whether the bond dipoles are arranged symmetrically.

Answer

SF₄: sulfur has 6 valence electrons; four form bonds to F and two form one lone pair. The five regions of electron density repel to a trigonal bipyramidal arrangement; the lone pair takes an equatorial position, so the atoms form a see-saw shape. XeF₄: xenon has 8 valence electrons; four form bonds and four form two lone pairs. The six regions repel to an octahedral arrangement; the two lone pairs sit opposite each other to minimise repulsion, so the atoms form a square planar shape. Both molecules have polar bonds (electronegativity difference 1.4). SF₄ is not symmetrical, because the lone pair is on one side, so the S–F bond dipoles do not cancel and SF₄ is polar. XeF₄ is symmetrical: the four Xe–F bond dipoles point to the corners of a square and cancel, so XeF₄ is non-polar.

Step by step
  1. SF₄: 6 valence electrons on S. Four bonds use 4; the remaining 2 are one lone pair. Five regions in total.
  2. Five regions give a trigonal bipyramidal arrangement. With one lone pair, the shape of the atoms is see-saw.
  3. XeF₄: 8 valence electrons on Xe. Four bonds use 4; the remaining 4 are two lone pairs. Six regions in total.
  4. Six regions give an octahedral arrangement. The two lone pairs are opposite each other, so the four F atoms form a square: square planar.
  5. All the bonds are polar: F (4.0) is more electronegative than S or Xe (2.6).
  6. SF₄ is not symmetrical, so the bond dipoles do not cancel: polar. XeF₄ is symmetrical, so they cancel: non-polar.
Full working
  1. SF₄: 5 regions, 1 lone pairsee-saw
  2. XeF₄: 6 regions, 2 lone pairs oppositesquare planar
  3. S–F and Xe–F bonds polardifference 1.4
  4. SF₄ not symmetricalpolar
  5. XeF₄ symmetricaldipoles cancel, non-polar
Question Two

Question Two

a
Achieved

The table gives data for three substances with similar molar masses.

Identify all the types of intermolecular force between the molecules in each substance.

SubstanceFormulaMolar mass (g mol⁻¹)Boiling point (°C)
propaneCH₃CH₂CH₃44.0−42
ethanalCH₃CHO44.020
ethanolCH₃CH₂OH46.078
Hint

Every molecule has temporary dipoles. Then look for a polar bond, and for an H atom bonded to O, N or F.

Answer

Propane: temporary dipole attractions only. Ethanal: temporary dipole attractions and permanent dipole attractions. Ethanol: temporary dipole attractions, permanent dipole attractions and hydrogen bonds.

Step by step
  1. All molecules have temporary dipole (London) attractions.
  2. Propane has no polar bonds that make the molecule polar, so it has only temporary dipoles.
  3. Ethanal has a polar C=O bond, so its molecules are polar and also attract by permanent dipoles.
  4. Ethanol has an O–H bond, so its molecules can also form hydrogen bonds, as well as having permanent dipoles.
Full working
  1. propanetemporary dipoles only
  2. ethanaltemporary and permanent dipoles
  3. ethanoltemporary and permanent dipoles, hydrogen bonds
b
Achieved

State whether the entropy of the system increases or decreases in each process, and give a reason:

(i) H₂O(l) → H₂O(g)

(ii) 2SO₂(g) + O₂(g) → 2SO₃(g)

(iii) NaCl(s) → Na⁺(aq) + Cl⁻(aq)

Hint

Entropy is a measure of disorder: how spread out the particles and their energy are. Gases have far more entropy than liquids and solids.

Answer

(i) Increases: a gas has much more disorder than a liquid, because its particles move freely and are far apart. (ii) Decreases: 3 moles of gas form 2 moles of gas, so there are fewer gas particles and less disorder. (iii) Increases: ions held in an ordered lattice become free to move and spread through the solution.

Step by step
  1. (i) Liquid water becomes water vapour. Gas particles are far more spread out and random, so entropy increases.
  2. (ii) The left side has 2 + 1 = 3 moles of gas and the right side 2 moles. Fewer gas particles means less disorder, so entropy decreases.
  3. (iii) The solid lattice is highly ordered. Dissolved ions are free to move through the water, so entropy increases.
Full working
  1. (i) liquid to gasincreases
  2. (ii) 3 mol gas to 2 mol gasdecreases
  3. (iii) ordered lattice to ions free in solutionincreases
c
Merit

Use the data in the table to explain the order of boiling points: propane, then ethanal, then ethanol.

Hint

The molar masses are almost equal, so the temporary dipole attractions are similar. What extra attractions does each substance have?

Answer

The three substances have similar molar masses (44 to 46 g mol⁻¹) and similar numbers of electrons, so the temporary dipole attractions between their molecules are of similar strength. Propane has only these, so little energy is needed to separate its molecules and it boils at −42 °C. Ethanal is polar (C=O), so its molecules also attract each other by permanent dipoles; the total attraction is stronger and more energy is needed, so it boils higher, at 20 °C. Ethanol molecules have an O–H bond and also form hydrogen bonds with each other, the strongest of these intermolecular forces, so ethanol needs the most energy to boil: 78 °C.

Step by step
  1. Boiling overcomes the attractions between molecules.
  2. Similar molar masses mean similar temporary dipole attractions in all three.
  3. Propane: temporary dipoles only, the weakest total attraction, the lowest boiling point (−42 °C).
  4. Ethanal: permanent dipoles as well, a stronger total attraction (20 °C).
  5. Ethanol: hydrogen bonds as well, the strongest total attraction, the highest boiling point (78 °C).
Full working
  1. similar molar masssimilar temporary dipole attractions
  2. propane: temporary onlylowest, −42 °C
  3. ethanal: + permanent dipoles20 °C
  4. ethanol: + hydrogen bondshighest, 78 °C
d
Excellence

Ammonium nitrate dissolves in water at 25 °C, even though dissolving it is endothermic:

NH₄NO₃(s) → NH₄⁺(aq) + NO₃⁻(aq) ΔrH = +25.7 kJ mol⁻¹

Discuss why this process is spontaneous, considering the entropy changes of both the system and the surroundings.

Hint

A process is spontaneous if the total entropy (system plus surroundings) increases. Which way does each part change here?

Answer

For a process to be spontaneous, the total entropy of the system and the surroundings must increase. The process is endothermic, so it absorbs heat from the surroundings (the water and the beaker). The surroundings have less thermal energy to spread around, so their entropy decreases: this works against dissolving. In the system, the NH₄⁺ and NO₃⁻ ions go from an ordered crystal lattice to being free to move and spread throughout the solution, a large increase in disorder, so the entropy of the system increases: this favours dissolving. At 25 °C the increase in the entropy of the system is larger than the decrease in the entropy of the surroundings, so the total entropy increases and ammonium nitrate dissolves spontaneously, even though it cools the water.

Step by step
  1. Spontaneous means the total entropy, system plus surroundings, increases.
  2. Endothermic: the process takes in heat from the surroundings, so the surroundings' entropy decreases. This is unfavourable.
  3. The system goes from an ordered solid lattice to ions moving freely in solution, so its entropy increases a lot. This is favourable.
  4. At 25 °C the gain in entropy of the system outweighs the loss in the surroundings.
  5. So the total entropy increases, and dissolving is spontaneous even though the solution gets colder.
Full working
  1. endothermicheat taken from surroundings, surroundings' entropy decreases
  2. solid lattice to free ionssystem entropy increases (large)
  3. system increase > surroundings decrease at 25 °C
  4. total entropy increasesspontaneous
Question Three

Question Three

a
Achieved

A student dissolves 2.00 g of sodium hydroxide, NaOH (M = 40.0 g mol⁻¹), in 50.0 g of water. The temperature rises from 19.2 °C to 29.4 °C. The specific heat capacity of water is 4.18 J g⁻¹ °C⁻¹.

Calculate ΔsolH for sodium hydroxide, in kJ mol⁻¹. Assume the solution has a mass of 50.0 g.

Hint

q = mcΔT gives the energy released. Then divide by the number of moles, and remember the sign.

Answer

q = 50.0 × 4.18 × 10.2 = 2132 J = 2.13 kJ. n(NaOH) = 2.00 ÷ 40.0 = 0.0500 mol. ΔsolH = −2.13 ÷ 0.0500 = −42.6 kJ mol⁻¹ (negative, because the temperature rose: exothermic).

Step by step
  1. ΔT = 29.4 − 19.2 = 10.2 °C.
  2. q = mcΔT = 50.0 × 4.18 × 10.2 = 2132 J = 2.132 kJ.
  3. n(NaOH) = 2.00 ÷ 40.0 = 0.0500 mol.
  4. The temperature rose, so energy was released and ΔsolH is negative.
  5. ΔsolH = −2.132 ÷ 0.0500 = −42.6 kJ mol⁻¹.
Full working
  1. q = 50.0 × 4.18 × 10.2 = 2132 J
  2. n = 2.00 ÷ 40.0 = 0.0500 mol
  3. ΔsolH = −2.132 ÷ 0.0500 = −42.6 kJ mol⁻¹
b
Achieved

The standard enthalpy of formation of ethanol, C₂H₅OH(l), is −277 kJ mol⁻¹.

Write the thermochemical equation for this enthalpy change, with states.

Hint

Formation: one mole of the compound made from its elements in their standard states.

Answer

2C(s) + 3H₂(g) + ½O₂(g) → C₂H₅OH(l) ΔfH° = −277 kJ mol⁻¹

Step by step
  1. The enthalpy of formation makes exactly one mole of the compound from its elements.
  2. The elements are in their standard states: carbon as C(s), hydrogen as H₂(g), oxygen as O₂(g).
  3. C₂H₅OH has 2 C, 6 H (3 H₂) and 1 O (½O₂).
  4. 2C(s) + 3H₂(g) + ½O₂(g) → C₂H₅OH(l), ΔfH° = −277 kJ mol⁻¹.
Full working
  1. 2C(s) + 3H₂(g) + ½O₂(g) → C₂H₅OH(l)
  2. ΔfH° = −277 kJ mol⁻¹
c
Merit

Standard enthalpies of formation (kJ mol⁻¹): C₂H₅OH(l) −277, CO₂(g) −394, H₂O(l) −286.

Calculate the standard enthalpy of combustion of ethanol, ΔcH°, showing the equation you use.

Hint

Write the balanced combustion equation first. ΔrH° = ΣΔfH°(products) − ΣΔfH°(reactants), and ΔfH° of O₂(g) is 0.

Answer

C₂H₅OH(l) + 3O₂(g) → 2CO₂(g) + 3H₂O(l). ΔcH° = [2 × (−394) + 3 × (−286)] − [(−277) + 0] = −1646 + 277 = −1369 kJ mol⁻¹.

Step by step
  1. Balanced equation: C₂H₅OH(l) + 3O₂(g) → 2CO₂(g) + 3H₂O(l).
  2. Products: 2 × (−394) + 3 × (−286) = −788 − 858 = −1646 kJ.
  3. Reactants: −277 + 0 = −277 kJ (an element in its standard state has ΔfH° = 0).
  4. ΔcH° = −1646 − (−277) = −1369 kJ mol⁻¹.
Full working
  1. C₂H₅OH(l) + 3O₂(g) → 2CO₂(g) + 3H₂O(l)
  2. products: 2(−394) + 3(−286) = −1646
  3. reactants: −277 + 0 = −277
  4. ΔcH° = −1646 − (−277) = −1369 kJ mol⁻¹
d
Excellence

In a spirit-burner experiment, burning 1.15 g of ethanol (M = 46.0 g mol⁻¹) heated 200 g of water in a metal can from 20.0 °C to 41.5 °C. The specific heat capacity of water is 4.18 J g⁻¹ °C⁻¹.

Calculate the experimental enthalpy of combustion of ethanol, and discuss why it differs from your answer to (c).

Hint

Find q for the water and n for the ethanol. For the difference, think about where the rest of the energy went.

Answer

q = 200 × 4.18 × 21.5 = 17 974 J = 18.0 kJ. n(ethanol) = 1.15 ÷ 46.0 = 0.0250 mol. ΔcH(experimental) = −17.97 ÷ 0.0250 = −719 kJ mol⁻¹. This is much less negative than −1369 kJ mol⁻¹ because less of the energy released reached the water than the calculation assumes. Much of the heat from the flame was lost to the surrounding air, and some was absorbed by the metal can, so the measured temperature rise was too small. The ethanol may also have burned incompletely in the limited air around the wick, forming carbon (soot) and carbon monoxide, which releases less energy than complete combustion to CO₂. Some ethanol may also have evaporated from the wick without burning, so the mass burned was less than the mass lost. All of these make the experimental value less negative.

Step by step
  1. ΔT = 41.5 − 20.0 = 21.5 °C.
  2. q = mcΔT = 200 × 4.18 × 21.5 = 17 974 J = 17.97 kJ.
  3. n(C₂H₅OH) = 1.15 ÷ 46.0 = 0.0250 mol.
  4. ΔcH = −17.97 ÷ 0.0250 = −719 kJ mol⁻¹.
  5. Heat lost to the air and absorbed by the can was not measured, so the temperature rise was smaller than it should be.
  6. Incomplete combustion (soot, carbon monoxide) releases less energy than complete combustion.
  7. Ethanol evaporating from the wick counts as burned but released no energy. Each reason makes the result less negative than −1369 kJ mol⁻¹.
Full working
  1. q = 200 × 4.18 × 21.5 = 17 974 J
  2. n = 1.15 ÷ 46.0 = 0.0250 mol
  3. ΔcH = −17.97 ÷ 0.0250 = −719 kJ mol⁻¹
  4. heat lost to air and cansmaller ΔT measured
  5. incomplete combustion, evaporationless energy released | less negative than −1369

All NCEA Level 3 Science

A Vertex Academy practice paper, written from NZQA's 2026 assessment specification for AS 91390. It is not an NZQA paper. Grades use the 2025 exam's cut scores: 8, 14 and 19 out of 24 for Achieved, Merit and Excellence.