Vertex Learn

Level 3 Physics mechanical systems practice paper 2026

Question One

Question One

a
Achieved

The International Space Station orbits 420 km above the Earth's surface. The Earth's mass is 5.97 × 10²⁴ kg and its radius 6.37 × 10⁶ m. G = 6.67 × 10⁻¹¹ N m² kg⁻².

Use g = GM ÷ r².

Calculate the gravitational field strength at the height of the space station.

Hint

r is measured from the centre of the Earth: add the height to the Earth's radius.

Answer

r = 6.37 × 10⁶ + 0.42 × 10⁶ = 6.79 × 10⁶ m. g = 6.67 × 10⁻¹¹ × 5.97 × 10²⁴ ÷ (6.79 × 10⁶)² = 8.64 m s⁻² (N kg⁻¹).

Step by step
  1. r = 6.37 × 10⁶ + 420 × 10³ = 6.79 × 10⁶ m.
  2. GM = 6.67 × 10⁻¹¹ × 5.97 × 10²⁴ = 3.98 × 10¹⁴ N m² kg⁻¹.
  3. g = GM ÷ r² = 3.98 × 10¹⁴ ÷ (6.79 × 10⁶)² = 8.64 m s⁻².
Full working
  1. r = 6.79 × 10⁶ m
  2. g = GM ÷ r² = 3.98 × 10¹⁴ ÷ (6.79 × 10⁶)²
  3. g = 8.64 N kg⁻¹
b
Achieved

The space station orbits at r = 6.79 × 10⁶ m from the Earth's centre. GM for the Earth is 3.98 × 10¹⁴ N m² kg⁻¹.

Use v = √(GM ÷ r).

Calculate the station's orbital speed.

Hint

Gravity provides the centripetal force: GMm ÷ r² = mv² ÷ r.

Answer

v = √(3.98 × 10¹⁴ ÷ 6.79 × 10⁶) = 7.66 × 10³ m s⁻¹.

Step by step
  1. Gravity gives the centripetal force: GMm ÷ r² = mv² ÷ r, so v² = GM ÷ r.
  2. v = √(3.98 × 10¹⁴ ÷ 6.79 × 10⁶) = √(5.86 × 10⁷) = 7.66 × 10³ m s⁻¹.
Full working
  1. v² = GM ÷ r = 3.98 × 10¹⁴ ÷ 6.79 × 10⁶
  2. v = 7.66 × 10³ m s⁻¹
c
Merit

Astronauts on the space station (r = 6.79 × 10⁶ m, v = 7.66 × 10³ m s⁻¹) float as if weightless, even though the gravitational field there is 8.64 N kg⁻¹.

Use T = 2πr ÷ v.

Calculate the period of the orbit in minutes, and explain why the astronauts feel weightless.

Hint

What is the only force on an astronaut and on the station? What does the floor need to push with?

Answer

T = 2π × 6.79 × 10⁶ ÷ 7.66 × 10³ = 5570 s = 92.9 minutes. Gravity still acts on the astronauts (8.64 N kg⁻¹, about 88% of its surface value), and it is the centripetal force that keeps them in orbit. The station and the astronauts are both in free fall, accelerating towards the Earth at the same rate, so the floor does not need to push on the astronauts: there is no support (normal) force. We feel our weight through that support force, so with none they feel weightless.

Step by step
  1. T = 2πr ÷ v = 2π × 6.79 × 10⁶ ÷ 7.66 × 10³ = 5570 s.
  2. 5570 ÷ 60 = 92.9 minutes.
  3. Gravity is not zero there: 8.64 N kg⁻¹. It provides the centripetal force for the orbit.
  4. The station and the astronauts fall around the Earth together with the same acceleration, g.
  5. So nothing has to push the astronauts: the support force is zero, and that is what feeling weightless means.
Full working
  1. T = 2π × 6.79 × 10⁶ ÷ 7.66 × 10³ = 5570 s
  2. T = 92.9 minutes
  3. gravity = centripetal forceboth in free fall
  4. same accelerationno support force
d
Excellence

At a science show, a 2.0 kg bucket of water is swung in a vertical circle of radius 0.90 m.

Use g = 9.81 m s⁻² and F = mv² ÷ r.

Calculate the smallest speed the bucket can have at the top without the water falling out, and explain why. At the bottom of the circle the bucket moves at 4.5 m s⁻¹. Calculate the tension in the rope there.

Hint

At the top, the slowest possible speed is when gravity alone provides the centripetal force. At the bottom, tension minus weight is the centripetal force.

Answer

At the top both the weight and the tension point down, towards the centre. The smallest speed is when the tension is zero and the weight alone provides the centripetal force: mg = mv² ÷ r, so v = √(gr) = √(9.81 × 0.90) = 2.97 m s⁻¹. Any slower and gravity would pull the water into a tighter curve than the bucket's path, so it would fall out. At the bottom the tension is up and the weight down; the net upward force is the centripetal force: T − mg = mv² ÷ r, so T = 2.0 × 9.81 + 2.0 × 4.5² ÷ 0.90 = 19.6 + 45.0 = 64.6 N.

Step by step
  1. At the top, the weight and any tension both point down, towards the centre.
  2. Slowest speed: tension is zero and weight alone gives the centripetal force: mg = mv² ÷ r.
  3. v = √(gr) = √(9.81 × 0.90) = 2.97 m s⁻¹.
  4. Slower than that, gravity gives more than the centripetal force needed, so the water would fall on a tighter curve, out of the bucket.
  5. At the bottom: tension up, weight down. Net force up = centripetal force: T − mg = mv² ÷ r.
  6. T = 2.0 × 9.81 + 2.0 × 4.5² ÷ 0.90 = 19.6 + 45.0 = 64.6 N.
Full working
  1. top: mg = mv² ÷ r (tension zero)
  2. v = √(9.81 × 0.90) = 2.97 m s⁻¹
  3. bottom: T − mg = mv² ÷ r
  4. T = 19.6 + 45.0 = 64.6 N
Question Two

Question Two

a
Achieved

A wind turbine at a Manawatū wind farm turns at 15 revolutions per minute. Each blade is 40 m long.

Use ω = 2πf and v = rω.

Calculate the angular velocity of the blades and the speed of a blade tip.

Hint

Change revolutions per minute into revolutions per second first.

Answer

f = 15 ÷ 60 = 0.25 Hz, so ω = 2π × 0.25 = 1.57 rad s⁻¹. v = 40 × 1.57 = 62.8 m s⁻¹.

Step by step
  1. 15 revolutions per minute = 15 ÷ 60 = 0.25 revolutions per second.
  2. ω = 2πf = 2π × 0.25 = 1.57 rad s⁻¹.
  3. Tip speed: v = rω = 40 × 1.57 = 62.8 m s⁻¹.
Full working
  1. f = 15 ÷ 60 = 0.25 Hz
  2. ω = 2π × 0.25 = 1.57 rad s⁻¹
  3. v = 40 × 1.57 = 62.8 m s⁻¹
b
Achieved

In a storm the turbine is braked. It slows steadily from 1.57 rad s⁻¹ to rest in 30 s.

Use α = Δω ÷ t.

Calculate its angular acceleration.

Hint

Final minus initial angular velocity, divided by the time.

Answer

α = (0 − 1.57) ÷ 30 = −0.0524 rad s⁻² (a deceleration of 0.0524 rad s⁻²).

Step by step
  1. Δω = 0 − 1.57 = −1.57 rad s⁻¹.
  2. α = Δω ÷ t = −1.57 ÷ 30 = −0.0524 rad s⁻².
  3. The negative sign means it is slowing down.
Full working
  1. α = (0 − 1.57) ÷ 30
  2. α = −0.0524 rad s⁻²
c
Merit

The turbine's rotor has a rotational inertia of 4.0 × 10⁶ kg m². It slows steadily from 1.57 rad s⁻¹ to rest in 30 s (α = −0.0524 rad s⁻²).

Use τ = Iα and θ = ((ωi + ωf) ÷ 2) × t.

Calculate the braking torque and how many revolutions the rotor makes while stopping.

Hint

Use the size of α for the torque. Convert the angle in radians to revolutions by dividing by 2π.

Answer

τ = 4.0 × 10⁶ × 0.0524 = 2.1 × 10⁵ N m. θ = ((1.57 + 0) ÷ 2) × 30 = 23.6 rad = 23.6 ÷ 2π = 3.75 revolutions.

Step by step
  1. Torque: τ = Iα = 4.0 × 10⁶ × 0.0524 = 2.09 × 10⁵ N m, about 2.1 × 10⁵ N m, opposing the rotation.
  2. Angle: θ = ((ωi + ωf) ÷ 2) × t = (1.57 ÷ 2) × 30 = 23.6 rad.
  3. Revolutions = 23.6 ÷ 2π = 3.75.
Full working
  1. τ = Iα = 4.0 × 10⁶ × 0.0524 = 2.1 × 10⁵ N m
  2. θ = (1.57 + 0) ÷ 2 × 30 = 23.6 rad
  3. 23.6 ÷ 2π = 3.75 revolutions
d
Excellence

A student sits on a spinning office chair holding a 2.0 kg weight in each hand at arm's length, 0.70 m from the axis. Without the weights, the student and chair have a rotational inertia of 1.8 kg m². They spin at 2.0 rad s⁻¹ and then pull the weights in to 0.15 m from the axis. Treat the weights as point masses and ignore friction.

Use I = mr², L = Iω and Ek(rot) = ½Iω².

Calculate the new angular velocity. Show that the rotational kinetic energy increases, and explain where the extra energy comes from.

Hint

Angular momentum is conserved because there is no outside torque. Add the weights' mr² to the 1.8 kg m².

Answer

I before = 1.8 + 2 × 2.0 × 0.70² = 3.76 kg m²; I after = 1.8 + 2 × 2.0 × 0.15² = 1.89 kg m². No outside torque acts, so angular momentum is conserved: 3.76 × 2.0 = 1.89 × ω, so ω = 3.98 rad s⁻¹. Ek before = ½ × 3.76 × 2.0² = 7.52 J; Ek after = ½ × 1.89 × 3.98² = 15.0 J. The kinetic energy roughly doubles. The extra 7.4 J comes from the work the student's arms do pulling the weights inwards: to keep each weight moving in its circle the arms must pull it towards the centre, and moving it inward along that force does work.

Step by step
  1. Rotational inertia before: 1.8 + 2 × 2.0 × 0.70² = 1.8 + 1.96 = 3.76 kg m².
  2. After: 1.8 + 2 × 2.0 × 0.15² = 1.8 + 0.09 = 1.89 kg m².
  3. With no outside torque, angular momentum is conserved: Iᵢωᵢ = I_f ω_f.
  4. ω_f = 3.76 × 2.0 ÷ 1.89 = 3.98 rad s⁻¹.
  5. Ek before = ½ × 3.76 × 2.0² = 7.52 J. Ek after = ½ × 1.89 × 3.98² = 15.0 J.
  6. The extra 7.4 J comes from the student: the arms pull each weight towards the axis and the weight moves inwards along that pull, so the arms do work on it.
Full working
  1. Iᵢ = 1.8 + 2 × 2.0 × 0.70² = 3.76 kg m²
  2. I_f = 1.8 + 2 × 2.0 × 0.15² = 1.89 kg m²
  3. 3.76 × 2.0 = 1.89 × ωL conserved
  4. ω = 3.98 rad s⁻¹
  5. Ek: 7.52 J to 15.0 Jwork done by the arms
Question Three

Question Three

a
Achieved

A 0.25 kg mass hangs on a spring with a spring constant of 40 N m⁻¹ and bounces up and down.

Use T = 2π√(m ÷ k).

Calculate the period of the oscillation.

Hint

Put the mass in kg and k in N m⁻¹ straight into the formula.

Answer

T = 2π√(0.25 ÷ 40) = 2π × 0.0791 = 0.497 s.

Step by step
  1. m ÷ k = 0.25 ÷ 40 = 0.00625.
  2. √0.00625 = 0.0791.
  3. T = 2π × 0.0791 = 0.497 s.
Full working
  1. T = 2π√(0.25 ÷ 40)
  2. T = 0.497 s
b
Achieved

A swing in a Nelson playground hangs on chains 2.4 m long. A child swings with small oscillations.

Use T = 2π√(L ÷ g) and g = 9.81 m s⁻².

Calculate the period of the swing.

Hint

Treat the swing as a simple pendulum of length 2.4 m.

Answer

T = 2π√(2.4 ÷ 9.81) = 2π × 0.495 = 3.11 s.

Step by step
  1. L ÷ g = 2.4 ÷ 9.81 = 0.245.
  2. √0.245 = 0.495.
  3. T = 2π × 0.495 = 3.11 s.
Full working
  1. T = 2π√(2.4 ÷ 9.81)
  2. T = 3.11 s
c
Merit

The 0.25 kg mass on the 40 N m⁻¹ spring oscillates with an amplitude of 0.060 m.

Use ω = √(k ÷ m), v_max = Aω and a_max = Aω².

Calculate the maximum speed and the maximum acceleration of the mass, and state where in the motion each one happens. Explain why.

Hint

Speed is greatest where the restoring force is zero; acceleration is greatest where the restoring force is greatest.

Answer

ω = √(40 ÷ 0.25) = 12.6 rad s⁻¹. v_max = 0.060 × 12.6 = 0.759 m s⁻¹, at the equilibrium position. a_max = 0.060 × 12.6² = 9.6 m s⁻², at each end of the motion (the extremes). The restoring force is proportional to the displacement (F = −ky), so it is zero at equilibrium and largest at the extremes; acceleration follows the force. As the mass moves towards equilibrium the force speeds it up the whole way, so it is fastest there; at the extremes it stops for an instant and turns round.

Step by step
  1. ω = √(k ÷ m) = √(40 ÷ 0.25) = √160 = 12.6 rad s⁻¹.
  2. v_max = Aω = 0.060 × 12.6 = 0.759 m s⁻¹.
  3. a_max = Aω² = 0.060 × 160 = 9.6 m s⁻².
  4. The restoring force is proportional to displacement: zero at equilibrium, greatest at the extremes.
  5. So acceleration is greatest at the extremes (where the mass is momentarily at rest) and zero at equilibrium.
  6. The mass speeds up all the way to equilibrium and slows after it, so the speed is greatest at equilibrium.
Full working
  1. ω = √(40 ÷ 0.25) = 12.6 rad s⁻¹
  2. v_max = 0.060 × 12.6 = 0.759 m s⁻¹at equilibrium
  3. a_max = 0.060 × 160 = 9.6 m s⁻²at the extremes
  4. F = −ky: zero at equilibrium, largest at the ends
d
Excellence

The mass on the spring (ω = 12.6 rad s⁻¹, amplitude 0.060 m) is pulled down to its lowest point and released.

Use y = A cos ωt and v = Aω sin ωt (measuring t from the release).

Calculate how long the mass takes to rise from its lowest point to 0.030 m below the equilibrium position, and its speed at that moment. Explain why this takes less than a quarter of the period, even though the mass has covered only half the distance to equilibrium.

Hint

Set y = 0.030 m in y = A cos ωt to find ωt. Work in radians.

Answer

0.030 = 0.060 cos ωt, so cos ωt = 0.5 and ωt = π ÷ 3 = 1.047 rad. t = 1.047 ÷ 12.6 = 0.0828 s. v = 0.060 × 12.6 × sin(π ÷ 3) = 0.657 m s⁻¹. The period is 2π ÷ 12.6 = 0.497 s, so a quarter period is 0.124 s; the time taken is T ÷ 6, which is two-thirds of a quarter period, not a half. The mass starts from rest and moves slowly at first, so it spends longest near the extreme; the first half of the distance takes two-thirds of the time, and the second half, at higher speed, takes only one-third.

Step by step
  1. At release the mass is at an extreme, so y = A cos ωt with A = 0.060 m.
  2. 0.030 = 0.060 cos ωt, so cos ωt = 0.5 and ωt = π ÷ 3 = 1.047 rad.
  3. t = 1.047 ÷ 12.6 = 0.0828 s.
  4. Speed: v = Aω sin ωt = 0.060 × 12.6 × sin(π ÷ 3) = 0.759 × 0.866 = 0.657 m s⁻¹.
  5. Period T = 2π ÷ ω = 0.497 s; a quarter period is 0.124 s, and 0.0828 s = T ÷ 6.
  6. It starts from rest and speeds up, so it covers the first half of the distance slowly: two-thirds of the quarter period. The second half is faster and takes only one-third.
Full working
  1. 0.030 = 0.060 cos ωtcos ωt = 0.5
  2. ωt = π ÷ 3 = 1.047 rad
  3. t = 1.047 ÷ 12.6 = 0.0828 s
  4. v = 0.759 × sin(π ÷ 3) = 0.657 m s⁻¹
  5. T ÷ 4 = 0.124 s; t = T ÷ 6slow near the extreme

All NCEA Level 3 Science

A Vertex Academy practice paper, written from NZQA's 2026 assessment specification for AS 91524. It is not an NZQA paper. Grades use the 2025 exam's cut scores: 7, 13 and 19 out of 24 for Achieved, Merit and Excellence.