Level 3 Physics wave systems practice paper 2026
Question One
A guitar string is 0.65 m long between its two fixed ends. Played open, its fundamental frequency is 196 Hz.
Use v = fλ.
Calculate the wavelength of the fundamental and the speed of the waves on the string.
Hint
At the fundamental there is a node at each end and one antinode in the middle: half a wavelength fits on the string.
Answer
λ = 2L = 2 × 0.65 = 1.30 m, so v = fλ = 196 × 1.30 = 255 m s⁻¹ (254.8 m s⁻¹).
Step by step
- Both ends are fixed, so both are nodes. The fundamental is one loop: half a wavelength.
- λ = 2L = 2 × 0.65 = 1.30 m.
- v = fλ = 196 × 1.30 = 254.8 m s⁻¹, about 255 m s⁻¹.
Full working
- λ = 2L = 1.30 m
- v = fλ = 196 × 1.30
- v = 255 m s⁻¹
The guitar string in part (a) (fundamental 196 Hz) can also vibrate in its third harmonic.
Calculate the frequency of the third harmonic, and describe the pattern of nodes and antinodes on the string.
Hint
On a string fixed at both ends every whole-number harmonic is possible: fn = n f₁.
Answer
f₃ = 3 × 196 = 588 Hz. The string vibrates in three loops: four nodes (one at each end and two between) and three antinodes.
Step by step
- For a string fixed at both ends, fn = n × f₁.
- f₃ = 3 × 196 = 588 Hz.
- The third harmonic fits three half-wavelengths on the string: three loops.
- So there are 4 nodes (including both ends) and 3 antinodes.
Full working
- f₃ = 3 × 196 = 588 Hz
- 3 loops: 4 nodes, 3 antinodes
An organ pipe is closed at one end and open at the other. Its air column is 0.40 m long, and the speed of sound is 343 m s⁻¹. Ignore any end correction.
Use v = fλ.
Calculate the fundamental frequency and the next frequency the pipe can sound, and explain why a pipe closed at one end has only odd harmonics.
Hint
A closed end is always a displacement node; an open end is always an antinode.
Answer
Fundamental: node at the closed end, antinode at the open end, so L = λ ÷ 4 and λ = 1.60 m; f₁ = 343 ÷ 1.60 = 214 Hz. The next standing wave fits three quarter-wavelengths (L = 3λ ÷ 4), so f₃ = 3 × 214 = 643 Hz. Because one end must be a node and the other an antinode, the pipe length can only hold an odd number of quarter-wavelengths (1, 3, 5, ...), so only odd multiples of the fundamental are possible.
Step by step
- Closed end: the air cannot move, a node. Open end: an antinode.
- The simplest pattern is a quarter of a wavelength: L = λ ÷ 4, so λ = 4 × 0.40 = 1.60 m.
- f₁ = v ÷ λ = 343 ÷ 1.60 = 214 Hz.
- The next pattern has three quarter-wavelengths in the pipe: λ = 4L ÷ 3, so f = 3f₁ = 643 Hz.
- Node at one end, antinode at the other means an odd number of quarter-wavelengths, so only odd harmonics (f₁, 3f₁, 5f₁, ...).
Full working
- L = λ ÷ 4, λ = 1.60 m
- f₁ = 343 ÷ 1.60 = 214 Hz
- next: L = 3λ ÷ 4f₃ = 643 Hz
- node + antinodeodd number of quarter-wavelengths
A guitarist tunes the string from part (a) against a 196 Hz tuning fork. Played together, the string and fork give 3 beats per second. When she tightens the string slightly, the beats get faster.
Determine the string's frequency before she tightened it, and explain your reasoning. Explain what she should do to tune the string, and by what percentage the wave speed on the string must change.
Hint
Beat frequency is the difference of the two frequencies. Tightening raises the tension, the wave speed and so the frequency.
Answer
Beat frequency = |f − 196| = 3 Hz, so the string is 193 Hz or 199 Hz. Tightening increases the tension, which increases the wave speed; the wavelength (2L) is fixed, so f = v ÷ λ increases. The beats got faster, so the difference grew: the string moved further from 196 Hz as its frequency rose. It must already have been above 196 Hz: 199 Hz. She should loosen the string until the beats slow and disappear. Frequency is proportional to wave speed (λ fixed), so the speed must fall by 3 ÷ 199 = 1.5%.
Step by step
- Two close frequencies give beats at f_beat = |f₁ − f₂|, so the string is 196 ± 3 Hz: 193 Hz or 199 Hz.
- Tightening increases the tension, so the wave speed on the string increases.
- The wavelength is fixed by the string's length (λ = 2L), so the frequency f = v ÷ λ goes up.
- If the string were 193 Hz, raising f would bring it towards 196 Hz and the beats would slow. They got faster, so the string was 199 Hz.
- She should loosen the string, lowering f until the beats slow to zero.
- f is proportional to v, so v must drop by the same fraction: 3 ÷ 199 = 0.015, a 1.5% decrease.
Full working
- f_beat = |f − 196| = 3 Hz193 or 199 Hz
- tighter: v up, λ = 2L fixedf up
- beats faster: moving away from 196 Hzf = 199 Hz
- loosen until no beats
- Δv ÷ v = 3 ÷ 199 = 1.5% decrease
Question Two
An ambulance's siren sounds at 960 Hz. It drives straight towards a person on the footpath at 25.0 m s⁻¹. The speed of sound is 343 m s⁻¹.
Use f′ = f vv − vs.
Calculate the frequency the person hears.
Hint
The source moves towards the listener, so subtract its speed in the bottom line.
Answer
f′ = 960 × 343 ÷ (343 − 25.0) = 960 × 343 ÷ 318 = 1040 Hz (1035 Hz).
Step by step
- Source approaching a stationary listener: f′ = f v ÷ (v − vs).
- f′ = 960 × 343 ÷ 318.
- f′ = 1035 Hz, about 1040 Hz to three significant figures.
Full working
- f′ = f vv − vs
- f′ = 960 × 343 ÷ 318
- f′ = 1035 Hz
After passing the person, the ambulance in part (a) (siren 960 Hz, 25.0 m s⁻¹) drives straight away. The speed of sound is 343 m s⁻¹.
Use f′ = f vv + vs.
Calculate the frequency the person now hears.
Hint
The source moves away, so add its speed in the bottom line.
Answer
f′ = 960 × 343 ÷ 368 = 895 Hz.
Step by step
- Source moving away: f′ = f v ÷ (v + vs).
- f′ = 960 × 343 ÷ (343 + 25.0) = 960 × 343 ÷ 368.
- f′ = 895 Hz.
Full working
- f′ = f vv + vs
- f′ = 960 × 343 ÷ 368
- f′ = 895 Hz
The ambulance's 960 Hz siren sounds higher to the person while it approaches at 25.0 m s⁻¹. The speed of sound is 343 m s⁻¹.
Explain, using wavefronts, why the frequency heard is higher while the ambulance approaches. Calculate the wavelength of the sound in front of the ambulance and compare it with the wavelength when the ambulance is still.
Hint
Between sending out one wavefront and the next, the ambulance moves forward.
Answer
Each wavefront spreads out from where the siren was when it was made. Between one wavefront and the next (one period, 1 ÷ 960 s) the ambulance moves forward, so the wavefronts ahead of it are bunched closer together. The speed of sound in the air does not change, so shorter wavelengths reach the person more often: a higher frequency. In front: λ = (v − vs) ÷ f = 318 ÷ 960 = 0.331 m; still: λ = 343 ÷ 960 = 0.357 m. The wavelength in front is shorter by the 0.026 m the ambulance moves in one period.
Step by step
- Each wavefront travels out at 343 m s⁻¹ from the point where it was produced.
- In one period the ambulance moves vs × T = 25.0 ÷ 960 = 0.026 m towards the person, so the next wavefront starts closer.
- The wavefronts in front are squashed together: a shorter wavelength.
- The wave speed is set by the air, not the source, so f = v ÷ λ: shorter λ at the same speed means a higher frequency.
- In front: λ = (343 − 25.0) ÷ 960 = 0.331 m. Still: λ = 343 ÷ 960 = 0.357 m.
Full working
- source moves 25.0 ÷ 960 = 0.026 m each period
- wavefronts bunched in frontλ shorter
- λ front = 318 ÷ 960 = 0.331 m
- λ still = 343 ÷ 960 = 0.357 m
- same v, shorter λhigher f
A student by the road records a passing fire engine's siren. As it approaches she measures 1020 Hz, and as it drives away 900 Hz. The fire engine travels at a steady speed and the speed of sound is 343 m s⁻¹.
Use f′ = f vv − vs and f′ = f vv + vs.
Calculate the speed of the fire engine and the true frequency of its siren.
Hint
Divide one equation by the other: the true frequency cancels, leaving one equation in vs.
Answer
Dividing: 1020 ÷ 900 = (v + vs) ÷ (v − vs), so 1.1333(343 − vs) = 343 + vs, giving 2.1333 vs = 0.1333 × 343 and vs = 21.4 m s⁻¹ (about 77 km per hour). Then f = 1020 × (343 − 21.4) ÷ 343 = 956 Hz. Check: 956 × 343 ÷ (343 + 21.4) = 900 Hz.
Step by step
- Approaching: 1020 = f × 343 ÷ (343 − vs). Receding: 900 = f × 343 ÷ (343 + vs).
- Divide the first by the second: 1020 ÷ 900 = (343 + vs) ÷ (343 − vs).
- 1.1333 × (343 − vs) = 343 + vs, so 388.7 − 1.1333 vs = 343 + vs.
- 2.1333 vs = 45.73, so vs = 21.4 m s⁻¹.
- f = 1020 × (343 − 21.4) ÷ 343 = 1020 × 0.9375 = 956 Hz.
- Check with the receding value: 956 × 343 ÷ 364.4 = 900 Hz.
Full working
- 1020 ÷ 900 = (343 + vs) ÷ (343 − vs)
- 2.1333 vs = 0.1333 × 343
- vs = 21.4 m s⁻¹
- f = 1020 × (343 − 21.4) ÷ 343
- f = 956 Hz
Question Three
A green laser of wavelength 532 nm shines at right angles onto a diffraction grating with 600 lines per mm.
Use nλ = d sin θ.
Calculate the slit spacing d and the angle of the first-order bright spot.
Hint
d is the distance between neighbouring lines: 1 mm ÷ 600, in metres.
Answer
d = 1.00 × 10⁻³ ÷ 600 = 1.67 × 10⁻⁶ m. sin θ = 532 × 10⁻⁹ ÷ 1.67 × 10⁻⁶ = 0.319, so θ = 18.6°.
Step by step
- d = 1 mm ÷ 600 = 1.00 × 10⁻³ ÷ 600 = 1.67 × 10⁻⁶ m.
- First order, n = 1: sin θ = λ ÷ d = 532 × 10⁻⁹ ÷ 1.67 × 10⁻⁶ = 0.319.
- θ = sin⁻¹ 0.319 = 18.6°.
Full working
- d = 1.00 × 10⁻³ ÷ 600 = 1.67 × 10⁻⁶ m
- sin θ = 532 × 10⁻⁹ ÷ 1.67 × 10⁻⁶ = 0.319
- θ = 18.6°
The 532 nm laser shines on the grating with d = 1.67 × 10⁻⁶ m.
Use nλ = d sin θ.
Calculate the highest order of bright spot that can be seen, and how many bright spots appear on a very wide screen.
Hint
sin θ can be at most 1, so n can be at most d ÷ λ.
Answer
n ≤ d ÷ λ = 1.67 × 10⁻⁶ ÷ 532 × 10⁻⁹ = 3.13, so the highest order is n = 3 (at 73.3°). Spots: the central one and orders 1, 2 and 3 on each side: 7 in all.
Step by step
- The largest possible angle is 90°, where sin θ = 1, so n ≤ d ÷ λ.
- d ÷ λ = 1.67 × 10⁻⁶ ÷ 532 × 10⁻⁹ = 3.13.
- n must be a whole number, so the highest order is 3 (sin θ = 0.958, θ = 73.3°).
- Count: n = 0, plus n = 1, 2, 3 on both sides: 1 + 6 = 7 bright spots.
Full working
- n ≤ d ÷ λ = 3.13
- highest order n = 3
- spots: 0, ±1, ±2, ±3 = 7
A red laser (λ = 650 nm) shines on two narrow slits 0.25 mm apart. Bright and dark fringes appear on a screen 2.0 m away.
Use x = λL ÷ d.
Calculate the spacing between neighbouring bright fringes, and explain why a bright fringe forms where it does.
Hint
At a bright fringe the waves from the two slits arrive in phase: the path difference is a whole number of wavelengths.
Answer
x = 650 × 10⁻⁹ × 2.0 ÷ 0.25 × 10⁻³ = 5.2 × 10⁻³ m = 5.2 mm. The light from each slit diffracts and the two spreading waves overlap. At a bright fringe the distance from one slit is a whole number of wavelengths more than from the other (path difference nλ), so the waves arrive in phase, crest on crest, and interfere constructively. Halfway between, the path difference is a half-number of wavelengths: the waves arrive out of phase and cancel, giving a dark fringe.
Step by step
- x = λL ÷ d = 650 × 10⁻⁹ × 2.0 ÷ (0.25 × 10⁻³).
- x = 5.2 × 10⁻³ m, which is 5.2 mm.
- Each slit diffracts the light, so the two waves overlap on the screen.
- Bright fringe: path difference = nλ, the waves arrive in phase and add (constructive interference).
- Dark fringe: path difference = (n + ½)λ, the waves arrive out of phase and cancel (destructive interference).
Full working
- x = λL ÷ d
- x = 650 × 10⁻⁹ × 2.0 ÷ 0.25 × 10⁻³ = 5.2 × 10⁻³ m
- bright: path difference nλin phase
- dark: (n + ½)λcancel
White light (wavelengths from 400 nm to 700 nm) shines on the grating with 600 lines per mm (d = 1.67 × 10⁻⁶ m).
Use nλ = d sin θ.
Explain why the grating makes a spectrum, and calculate the angles at which the first-order spectrum starts and ends. Show that the second-order and third-order spectra overlap.
Hint
Each wavelength has its own angle. Compare the red end of the second order with the violet end of the third order.
Answer
sin θ = nλ ÷ d, so for a given order each wavelength has its own angle: longer wavelengths are bent further, so the colours separate into a spectrum with violet nearest the centre and red furthest out (the central spot stays white, as every wavelength has θ = 0). First order: 400 nm at sin θ = 0.240, θ = 13.9°; 700 nm at sin θ = 0.420, θ = 24.8°. Second order red, 700 nm: sin θ = 0.840, θ = 57.1°. Third order violet, 400 nm: sin θ = 0.720, θ = 46.1°. The third order starts at 46.1°, before the second order ends at 57.1°, so they overlap.
Step by step
- Each wavelength meets the condition nλ = d sin θ at a different angle, so white light is split into its colours.
- Longer wavelength means a bigger angle: violet is nearest the centre, red furthest out. At n = 0 every colour is at 0°, so the centre is white.
- First order, 400 nm: sin θ = 400 × 10⁻⁹ ÷ 1.67 × 10⁻⁶ = 0.240, θ = 13.9°.
- First order, 700 nm: sin θ = 0.420, θ = 24.8°.
- Second order ends with 700 nm: sin θ = 2 × 700 × 10⁻⁹ ÷ 1.67 × 10⁻⁶ = 0.840, θ = 57.1°.
- Third order starts with 400 nm: sin θ = 3 × 400 × 10⁻⁹ ÷ 1.67 × 10⁻⁶ = 0.720, θ = 46.1°.
- 46.1° is less than 57.1°, so the start of the third order lies inside the second order: they overlap.
Full working
- sin θ = nλ ÷ deach λ its own angle
- n = 1: 13.9° (400 nm) to 24.8° (700 nm)
- n = 2, 700 nm: 57.1°
- n = 3, 400 nm: 46.1°
- 46.1° < 57.1°orders 2 and 3 overlap
A Vertex Academy practice paper, written from NZQA's 2026 assessment specification for AS 91523. It is not an NZQA paper. Grades use the 2025 exam's cut scores: 7, 14 and 19 out of 24 for Achieved, Merit and Excellence.